#!/usr/bin/env bash ################################################################################ ################################################################################ ########### Super-Linter linting Functions @admiralawkbar ###################### ################################################################################ ################################################################################ ########################## FUNCTION CALLS BELOW ################################ ################################################################################ ################################################################################ #### Function LintCodebase ##################################################### function LintCodebase() { #################### # Pull in the vars # #################### FILE_TYPE="${1}" && shift # Pull the variable and remove from array path (Example: JSON) LINTER_NAME="${1}" && shift # Pull the variable and remove from array path (Example: jsonlint) LINTER_COMMAND="${1}" && shift # Pull the variable and remove from array path (Example: jsonlint -c ConfigFile /path/to/file) FILE_EXTENSIONS="${1}" && shift # Pull the variable and remove from array path (Example: *.json) FILTER_REGEX_INCLUDE="${1}" && shift # Pull the variable and remove from array path (Example: */src/*,*/test/*) FILTER_REGEX_EXCLUDE="${1}" && shift # Pull the variable and remove from array path (Example: */examples/*,*/test/*.test) FILE_ARRAY=("$@") # Array of files to validate (Example: ${FILE_ARRAY_JSON}) ###################### # Create Print Array # ###################### PRINT_ARRAY=() ################ # print header # ################ PRINT_ARRAY+=("") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("Linting [${FILE_TYPE}] files...") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("----------------------------------------------") ##################################### # Validate we have linter installed # ##################################### # Edgecase for Lintr as it is a Package for R if [[ ${LINTER_NAME} == *"lintr"* ]]; then VALIDATE_INSTALL_CMD=$(command -v "R" 2>&1) else VALIDATE_INSTALL_CMD=$(command -v "${LINTER_NAME}" 2>&1) fi ####################### # Load the error code # ####################### ERROR_CODE=$? ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then # Failed error "Failed to find [${LINTER_NAME}] in system!" fatal "[${VALIDATE_INSTALL_CMD}]" else # Success debug "Successfully found binary for ${F[W]}[${LINTER_NAME}]${F[B]} in system location: ${F[W]}[${VALIDATE_INSTALL_CMD}]" fi ########################## # Initialize empty Array # ########################## LIST_FILES=() ################ # Set the flag # ################ SKIP_FLAG=0 ############################################################ # Check to see if we need to go through array or all files # ############################################################ if [ ${#FILE_ARRAY[@]} -eq 0 ] && [ "${VALIDATE_ALL_CODEBASE}" == "false" ]; then # No files found in commit and user has asked to not validate code base SKIP_FLAG=1 debug " - No files found in changeset to lint for language:[${FILE_TYPE}]" elif [ ${#FILE_ARRAY[@]} -ne 0 ]; then # We have files added to array of files to check LIST_FILES=("${FILE_ARRAY[@]}") # Copy the array into list else if [[ ${FILE_TYPE} == "BASH" ]] || [[ ${FILE_TYPE} == "BASH_EXEC" ]] || [[ ${FILE_TYPE} == "SHELL_SHFMT" ]]; then # Populate a list of valid shell scripts. PopulateShellScriptsList else ############################################################################### # Set the file separator to newline to allow for grabbing objects with spaces # ############################################################################### IFS=$'\n' ################################# # Get list of all files to lint # ################################# mapfile -t LIST_FILES < <(find "${GITHUB_WORKSPACE}" \ -path "*/node_modules" -prune -o \ -path "*/.git" -prune -o \ -path "*/.venv" -prune -o \ -path "*/.rbenv" -prune -o \ -type f -regex "${FILE_EXTENSIONS}" 2>&1) ########################### # Set IFS back to default # ########################### IFS="${DEFAULT_IFS}" fi ############################################################ # Set it back to empty if loaded with blanks from scanning # ############################################################ if [ ${#LIST_FILES[@]} -lt 1 ]; then ###################### # Set to empty array # ###################### LIST_FILES=() ############################# # Skip as we found no files # ############################# SKIP_FLAG=1 fi fi ################################################# # Filter files if FILTER_REGEX_INCLUDE is set # ################################################# if [ "$FILTER_REGEX_INCLUDE" ]; then for index in "${!LIST_FILES[@]}"; do [[ ! (${LIST_FILES[$index]} =~ $FILTER_REGEX_INCLUDE) ]] && unset -v 'LIST_FILES[$index]' done fi ################################################# # Filter files if FILTER_REGEX_EXCLUDE is set # ################################################# if [ "$FILTER_REGEX_EXCLUDE" ]; then for index in "${!LIST_FILES[@]}"; do [[ ${LIST_FILES[$index]} =~ $FILTER_REGEX_EXCLUDE ]] && unset -v 'LIST_FILES[$index]' done fi ############################### # Check if any data was found # ############################### if [ ${SKIP_FLAG} -eq 0 ]; then ###################### # Print Header array # ###################### for LINE in "${PRINT_ARRAY[@]}"; do ######################### # Print the header info # ######################### info "${LINE}" done ######################################## # Prepare context if TAP format output # ######################################## if IsTAP; then TMPFILE=$(mktemp -q "/tmp/super-linter-${FILE_TYPE}.XXXXXX") INDEX=0 mkdir -p "${REPORT_OUTPUT_FOLDER}" REPORT_OUTPUT_FILE="${REPORT_OUTPUT_FOLDER}/super-linter-${FILE_TYPE}.${OUTPUT_FORMAT}" fi ################## # Lint the files # ################## for FILE in "${LIST_FILES[@]}"; do ################################### # Get the file name and directory # ################################### FILE_NAME=$(basename "${FILE}" 2>&1) DIR_NAME=$(dirname "${FILE}" 2>&1) ###################################################### # Make sure we don't lint node modules or test cases # ###################################################### if [[ ${FILE} == *"node_modules"* ]]; then # This is a node modules file continue elif [[ ${FILE} == *"${TEST_CASE_FOLDER}"* ]]; then # This is the test cases, we should always skip continue elif [[ ${FILE} == *".git" ]] || [[ ${FILE} == *".git/"* ]]; then # This is likely the .git folder and shouldn't be parsed continue elif [[ ${FILE} == *".venv"* ]]; then # This is likely the python virtual environment folder and shouldn't be parsed continue elif [[ ${FILE} == *".rbenv"* ]]; then # This is likely the ruby environment folder and shouldn't be parsed continue elif [[ ${FILE_TYPE} == "BASH" ]] && ! IsValidShellScript "${FILE}"; then # not a valid script and we need to skip continue elif [[ ${FILE_TYPE} == "BASH_EXEC" ]] && ! IsValidShellScript "${FILE}"; then # not a valid script and we need to skip continue elif [[ ${FILE_TYPE} == "SHELL_SHFMT" ]] && ! IsValidShellScript "${FILE}"; then # not a valid script and we need to skip continue fi ################################## # Increase the linted file index # ################################## (("INDEX++")) ############## # File print # ############## info "---------------------------" info "File:[${FILE}]" ################################# # Add the language to the array # ################################# LINTED_LANGUAGES_ARRAY+=("${FILE_TYPE}") #################### # Set the base Var # #################### LINT_CMD='' #################################### # Corner case for pwsh subshell # # - PowerShell (PSScriptAnalyzer) # # - ARM (arm-ttk) # #################################### if [[ ${FILE_TYPE} == "POWERSHELL" ]] || [[ ${FILE_TYPE} == "ARM" ]]; then ################################ # Lint the file with the rules # ################################ # Need to run PowerShell commands using pwsh -c, also exit with exit code from inner subshell LINT_CMD=$( cd "${GITHUB_WORKSPACE}" || exit pwsh -NoProfile -NoLogo -Command "${LINTER_COMMAND} ${FILE}; if (\${Error}.Count) { exit 1 }" exit $? 2>&1 ) ############################################################################### # Corner case for groovy as we have to pass it as path and file in ant format # ############################################################################### elif [[ ${FILE_TYPE} == "GROOVY" ]]; then ####################################### # Lint the file with the updated path # ####################################### LINT_CMD=$( cd "${GITHUB_WORKSPACE}" || exit ${LINTER_COMMAND} --path "${DIR_NAME}" --files "$FILE_NAME" 2>&1 ) ############################################################################### # Corner case for R as we have to pass it to R # ############################################################################### elif [[ ${FILE_TYPE} == "R" ]]; then ####################################### # Lint the file with the updated path # ####################################### if [ ! -f "${DIR_NAME}/.lintr" ]; then r_dir="${GITHUB_WORKSPACE}" else r_dir="${DIR_NAME}" fi LINT_CMD=$( cd "$r_dir" || exit R --slave -e "errors <- lintr::lint('$FILE');print(errors);quit(save = 'no', status = if (length(errors) > 0) 1 else 0)" 2>&1 ) #LINTER_COMMAND="lintr::lint('${FILE}')" ######################################################### # Corner case for C# as it writes to tty and not stdout # ######################################################### elif [[ ${FILE_TYPE} == "CSHARP" ]]; then LINT_CMD=$( cd "${DIR_NAME}" || exit ${LINTER_COMMAND} "${FILE_NAME}" | tee /dev/tty2 2>&1 exit "${PIPESTATUS[0]}" ) else ################################ # Lint the file with the rules # ################################ LINT_CMD=$( cd "${GITHUB_WORKSPACE}" || exit ${LINTER_COMMAND} "${FILE}" 2>&1 ) fi ####################### # Load the error code # ####################### ERROR_CODE=$? ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then if [[ ${FILE_TYPE} == "BASH_EXEC" ]]; then ######## # WARN # ######## warn "Warnings found in [${LINTER_NAME}] linter!" warn "${LINT_CMD}" else ######### # Error # ######### error "Found errors in [${LINTER_NAME}] linter!" error "[${LINT_CMD}]" error "Linter CMD:[${LINTER_COMMAND} ${FILE}]" # Increment the error count (("ERRORS_FOUND_${FILE_TYPE}++")) fi ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then NotOkTap "${INDEX}" "${FILE}" "${TMPFILE}" AddDetailedMessageIfEnabled "${LINT_CMD}" "${TMPFILE}" fi else ########### # Success # ########### info " - File:${F[W]}[${FILE_NAME}]${F[B]} was linted with ${F[W]}[${LINTER_NAME}]${F[B]} successfully" ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then OkTap "${INDEX}" "${FILE}" "${TMPFILE}" fi fi done ################################# # Generate report in TAP format # ################################# if IsTAP && [ ${INDEX} -gt 0 ]; then HeaderTap "${INDEX}" "${REPORT_OUTPUT_FILE}" cat "${TMPFILE}" >>"${REPORT_OUTPUT_FILE}" fi fi } ################################################################################ #### Function TestCodebase ##################################################### function TestCodebase() { #################### # Pull in the vars # #################### FILE_TYPE="${1}" # Pull the variable and remove from array path (Example: JSON) LINTER_NAME="${2}" # Pull the variable and remove from array path (Example: jsonlint) LINTER_COMMAND="${3}" # Pull the variable and remove from array path (Example: jsonlint -c ConfigFile /path/to/file) FILE_EXTENSIONS="${4}" # Pull the variable and remove from array path (Example: *.json) INDIVIDUAL_TEST_FOLDER="${5}" # Folder for specific tests TESTS_RAN=0 # Incremented when tests are ran, this will help find failed finds ################ # print header # ################ info "----------------------------------------------" info "----------------------------------------------" info "Testing Codebase [${FILE_TYPE}] files..." info "----------------------------------------------" info "----------------------------------------------" ##################################### # Validate we have linter installed # ##################################### # Edgecase for Lintr as it is a Package for R if [[ ${LINTER_NAME} == *"lintr"* ]]; then VALIDATE_INSTALL_CMD=$(command -v "R" 2>&1) else VALIDATE_INSTALL_CMD=$(command -v "${LINTER_NAME}" 2>&1) fi ####################### # Load the error code # ####################### ERROR_CODE=$? ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then # Failed error "Failed to find [${LINTER_NAME}] in system!" fatal "[${VALIDATE_INSTALL_CMD}]" else # Success info "Successfully found binary for ${F[W]}[${LINTER_NAME}]${F[B]} in system location: ${F[W]}[${VALIDATE_INSTALL_CMD}]" fi ########################## # Initialize empty Array # ########################## LIST_FILES=() ################################# # Get list of all files to lint # ################################# mapfile -t LIST_FILES < <(find "${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}/${INDIVIDUAL_TEST_FOLDER}" \ -path "*/node_modules" -prune -o \ -path "*/.venv" -prune -o \ -path "*/.git" -prune -o \ -path "*/.rbenv" -prune -o \ -type f -regex "${FILE_EXTENSIONS}" \ ! -path "${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}/ansible/ghe-initialize/*" | sort 2>&1) ######################################## # Prepare context if TAP output format # ######################################## if IsTAP; then TMPFILE=$(mktemp -q "/tmp/super-linter-${FILE_TYPE}.XXXXXX") mkdir -p "${REPORT_OUTPUT_FOLDER}" REPORT_OUTPUT_FILE="${REPORT_OUTPUT_FOLDER}/super-linter-${FILE_TYPE}.${OUTPUT_FORMAT}" fi ################## # Lint the files # ################## for FILE in "${LIST_FILES[@]}"; do ##################### # Get the file name # ##################### FILE_NAME=$(basename "${FILE}" 2>&1) DIR_NAME=$(dirname "${FILE}" 2>&1) ############################ # Get the file pass status # ############################ # Example: markdown_good_1.md -> good FILE_STATUS=$(echo "${FILE_NAME}" | cut -f2 -d'_') ######################################################### # If not found, assume it should be linted successfully # ######################################################### if [ -z "${FILE_STATUS}" ] || [[ ${FILE} == *"README"* ]]; then ################################## # Set to good for proper linting # ################################## FILE_STATUS="good" fi ############## # File print # ############## info "---------------------------" info "File:[${FILE}]" ######################## # Set the lint command # ######################## LINT_CMD='' ####################################### # Check if docker and get folder name # ####################################### if [[ ${FILE_TYPE} == *"DOCKER"* ]]; then if [[ ${FILE} == *"good"* ]]; then ############# # Good file # ############# FILE_STATUS='good' else ############ # Bad file # ############ FILE_STATUS='bad' fi fi ##################### # Check for ansible # ##################### if [[ ${FILE_TYPE} == "ANSIBLE" ]]; then ######################################### # Make sure we don't lint certain files # ######################################### if [[ ${FILE} == *"vault.yml"* ]] || [[ ${FILE} == *"galaxy.yml"* ]]; then # This is a file we don't look at continue fi ################################ # Lint the file with the rules # ################################ LINT_CMD=$( cd "${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}/${INDIVIDUAL_TEST_FOLDER}" || exit ${LINTER_COMMAND} "${FILE}" 2>&1 ) elif [[ ${FILE_TYPE} == "POWERSHELL" ]] || [[ ${FILE_TYPE} == "ARM" ]]; then ################################ # Lint the file with the rules # ################################ # Need to run PowerShell commands using pwsh -c, also exit with exit code from inner subshell LINT_CMD=$( cd "${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}" || exit pwsh -NoProfile -NoLogo -Command "${LINTER_COMMAND} ${FILE}; if (\${Error}.Count) { exit 1 }" exit $? 2>&1 ) ############################################################################### # Corner case for groovy as we have to pass it as path and file in ant format # ############################################################################### elif [[ ${FILE_TYPE} == "GROOVY" ]]; then ####################################### # Lint the file with the updated path # ####################################### LINT_CMD=$( cd "${GITHUB_WORKSPACE}" || exit ${LINTER_COMMAND} --path "${DIR_NAME}" --files "$FILE_NAME" 2>&1 ) ############################################################################### # Corner case for R as we have to pass it to R # ############################################################################### elif [[ ${FILE_TYPE} == "R" ]]; then ####################################### # Lint the file with the updated path # ####################################### LINT_CMD=$( cd "${GITHUB_WORKSPACE}" || exit R --slave -e "errors <- lintr::lint('$FILE');print(errors);quit(save = 'no', status = if (length(errors) > 0) 1 else 0)" 2>&1 ) ######################################################### # Corner case for C# as it writes to tty and not stdout # ######################################################### elif [[ ${FILE_TYPE} == "CSHARP" ]]; then LINT_CMD=$( cd "${DIR_NAME}" || exit ${LINTER_COMMAND} "${FILE_NAME}" | tee /dev/tty2 2>&1 exit "${PIPESTATUS[0]}" ) else ################################ # Lint the file with the rules # ################################ LINT_CMD=$( cd "${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}" || exit ${LINTER_COMMAND} "${FILE}" 2>&1 ) fi ####################### # Load the error code # ####################### ERROR_CODE=$? ######################################## # Increment counter that check was ran # ######################################## (("TESTS_RAN++")) ######################################## # Check for if it was supposed to pass # ######################################## if [[ ${FILE_STATUS} == "good" ]]; then ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then ######### # Error # ######### error "Found errors in [${LINTER_NAME}] linter!" error "[${LINT_CMD}]" error "Linter CMD:[${LINTER_COMMAND} ${FILE}]" # Increment the error count (("ERRORS_FOUND_${FILE_TYPE}++")) else ########### # Success # ########### info " - File:${F[W]}[${FILE_NAME}]${F[B]} was linted with ${F[W]}[${LINTER_NAME}]${F[B]} successfully" fi ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then OkTap "${TESTS_RAN}" "${FILE_NAME}" "${TMPFILE}" fi else ####################################### # File status = bad, this should fail # ####################################### ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -eq 0 ]; then ######### # Error # ######### error "Found errors in [${LINTER_NAME}] linter!" error "This file should have failed test case!" error "Command run:${NC}[\$${LINT_CMD}]" error "[${LINT_CMD}]" error "Linter CMD:[${LINTER_COMMAND} ${FILE}]" # Increment the error count (("ERRORS_FOUND_${FILE_TYPE}++")) else ########### # Success # ########### info " - File:${F[W]}[${FILE_NAME}]${F[B]} failed test case with ${F[W]}[${LINTER_NAME}]${F[B]} successfully" fi ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then NotOkTap "${TESTS_RAN}" "${FILE_NAME}" "${TMPFILE}" AddDetailedMessageIfEnabled "${LINT_CMD}" "${TMPFILE}" fi fi done ########################################################################### # Generate report in TAP format and validate with the expected TAP output # ########################################################################### if IsTAP && [ ${TESTS_RAN} -gt 0 ]; then HeaderTap "${TESTS_RAN}" "${REPORT_OUTPUT_FILE}" cat "${TMPFILE}" >>"${REPORT_OUTPUT_FILE}" ######################################################################## # If expected TAP report exists then compare with the generated report # ######################################################################## EXPECTED_FILE="${GITHUB_WORKSPACE}/${TEST_CASE_FOLDER}/${INDIVIDUAL_TEST_FOLDER}/reports/expected-${FILE_TYPE}.tap" if [ -e "${EXPECTED_FILE}" ]; then TMPFILE=$(mktemp -q "/tmp/diff-${FILE_TYPE}.XXXXXX") ## Ignore white spaces, case sensitive if ! diff -a -w -i "${EXPECTED_FILE}" "${REPORT_OUTPUT_FILE}" >"${TMPFILE}" 2>&1; then ############################################# # We failed to compare the reporting output # ############################################# error "Failed to assert TAP output:[${LINTER_NAME}]"! info "Please validate the asserts!" cat "${TMPFILE}" exit 1 else # Success info "Successfully validation in the expected TAP format for ${F[W]}[${LINTER_NAME}]" fi else warn "No TAP expected file found at:[${EXPECTED_FILE}]" info "skipping report assertions" ##################################### # Append the file type to the array # ##################################### WARNING_ARRAY_TEST+=("${FILE_TYPE}") fi fi ############################## # Validate we ran some tests # ############################## if [ "${TESTS_RAN}" -eq 0 ]; then ################################################# # We failed to find files and no tests were ran # ################################################# error "Failed to find any tests ran for the Linter:[${LINTER_NAME}]"! fatal "Please validate logic or that tests exist!" fi } ################################################################################ #### Function RunTestCases ##################################################### function RunTestCases() { # This loop will run the test cases and exclude user code # This is called from the automation process to validate new code # When a PR is opened, the new code is validated with the default branch # version of linter.sh, and a new container is built with the latest codebase # for testing. That container is spun up, and ran, # with the flag: TEST_CASE_RUN=true # So that the new code can be validated against the test cases ################# # Header prints # ################# info "----------------------------------------------" info "-------------- TEST CASE RUN -----------------" info "----------------------------------------------" ####################### # Test case languages # ####################### # TestCodebase "Language" "Linter" "Linter-command" "Regex to find files" "Test Folder" TestCodebase "ANSIBLE" "ansible-lint" "ansible-lint -v -c ${ANSIBLE_LINTER_RULES}" ".*\.\(yml\|yaml\)\$" "ansible" TestCodebase "ARM" "arm-ttk" "Import-Module ${ARM_TTK_PSD1} ; \${config} = \$(Import-PowerShellDataFile -Path ${ARM_LINTER_RULES}) ; Test-AzTemplate @config -TemplatePath" ".*\.\(json\)\$" "arm" TestCodebase "BASH" "shellcheck" "shellcheck --color --external-sources" ".*\.\(sh\|bash\|dash\|ksh\)\$" "shell" TestCodebase "BASH_EXEC" "bash-exec" "bash-exec" ".*\.\(sh\|bash\|dash\|ksh\)\$" "shell" TestCodebase "CLOUDFORMATION" "cfn-lint" "cfn-lint --config-file ${CLOUDFORMATION_LINTER_RULES}" ".*\.\(json\|yml\|yaml\)\$" "cloudformation" TestCodebase "CLOJURE" "clj-kondo" "clj-kondo --config ${CLOJURE_LINTER_RULES} --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$" "clojure" TestCodebase "COFFEESCRIPT" "coffeelint" "coffeelint -f ${COFFEESCRIPT_LINTER_RULES}" ".*\.\(coffee\)\$" "coffeescript" TestCodebase "CSHARP" "dotnet-format" "dotnet-format --check --folder --exclude / --include" ".*\.\(cs\)\$" "csharp" TestCodebase "CSS" "stylelint" "stylelint --config ${CSS_LINTER_RULES}" ".*\.\(css\|scss\|sass\)\$" "css" TestCodebase "DART" "dart" "dartanalyzer --fatal-infos --fatal-warnings --options ${DART_LINTER_RULES}" ".*\.\(dart\)\$" "dart" TestCodebase "DOCKERFILE" "dockerfilelint" "dockerfilelint -c ${DOCKERFILE_LINTER_RULES}" ".*\(Dockerfile\)\$" "docker" TestCodebase "DOCKERFILE_HADOLINT" "hadolint" "hadolint -c ${DOCKERFILE_HADOLINT_LINTER_RULES}" ".*\(Dockerfile\)\$" "docker" TestCodebase "EDITORCONFIG" "editorconfig-checker" "editorconfig-checker" ".*\.ext$" "editorconfig-checker" TestCodebase "ENV" "dotenv-linter" "dotenv-linter" ".*\.\(env\)\$" "env" TestCodebase "GO" "golangci-lint" "golangci-lint run -c ${GO_LINTER_RULES}" ".*\.\(go\)\$" "golang" TestCodebase "GROOVY" "npm-groovy-lint" "npm-groovy-lint -c $GROOVY_LINTER_RULES --failon warning" ".*\.\(groovy\|jenkinsfile\|gradle\|nf\)\$" "groovy" TestCodebase "HTML" "htmlhint" "htmlhint --config ${HTML_LINTER_RULES}" ".*\.\(html\)\$" "html" TestCodebase "JAVA" "checkstyle" "java -jar /usr/bin/checkstyle -c ${JAVA_LINTER_RULES}" ".*\.\(java\)\$" "java" TestCodebase "JAVASCRIPT_ES" "eslint" "eslint --no-eslintrc -c ${JAVASCRIPT_LINTER_RULES}" ".*\.\(js\)\$" "javascript" TestCodebase "JAVASCRIPT_STANDARD" "standard" "standard ${JAVASCRIPT_STANDARD_LINTER_RULES}" ".*\.\(js\)\$" "javascript" TestCodebase "JSON" "jsonlint" "jsonlint" ".*\.\(json\)\$" "json" TestCodebase "KOTLIN" "ktlint" "ktlint" ".*\.\(kt\|kts\)\$" "kotlin" TestCodebase "LATEX" "chktex" "chktex -q -l ${LATEX_LINTER_RULES}" ".*\.\(tex\)\$" "latex" TestCodebase "LUA" "lua" "luacheck" ".*\.\(lua\)\$" "lua" TestCodebase "MARKDOWN" "markdownlint" "markdownlint -c ${MARKDOWN_LINTER_RULES}" ".*\.\(md\)\$" "markdown" TestCodebase "PERL" "perl" "perlcritic" ".*\.\(pl\|pm\|t\)\$" "perl" TestCodebase "PHP_BUILTIN" "php" "php -l" ".*\.\(php\)\$" "php" TestCodebase "PHP_PHPCS" "phpcs" "phpcs --standard=${PHP_PHPCS_LINTER_RULES}" ".*\.\(php\)\$" "php" TestCodebase "PHP_PHPSTAN" "phpstan" "phpstan analyse --no-progress --no-ansi -c ${PHP_PHPSTAN_LINTER_RULES}" ".*\.\(php\)\$" "php" TestCodebase "PHP_PSALM" "psalm" "psalm --config=${PHP_PSALM_LINTER_RULES}" ".*\.\(php\)\$" "php" TestCodebase "OPENAPI" "spectral" "spectral lint -r ${OPENAPI_LINTER_RULES}" ".*\.\(ymlopenapi\|jsonopenapi\)\$" "openapi" TestCodebase "POWERSHELL" "pwsh" "Invoke-ScriptAnalyzer -EnableExit -Settings ${POWERSHELL_LINTER_RULES} -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$" "powershell" TestCodebase "PROTOBUF" "protolint" "protolint lint --config_path ${PROTOBUF_LINTER_RULES}" ".*\.\(proto\)\$" "protobuf" TestCodebase "PYTHON_BLACK" "black" "black --config ${PYTHON_BLACK_LINTER_RULES} --diff --check" ".*\.\(py\)\$" "python" TestCodebase "PYTHON_FLAKE8" "flake8" "flake8 --config ${PYTHON_FLAKE8_LINTER_RULES}" ".*\.\(py\)\$" "python" TestCodebase "PYTHON_PYLINT" "pylint" "pylint --rcfile ${PYTHON_PYLINT_LINTER_RULES}" ".*\.\(py\)\$" "python" TestCodebase "R" "lintr" "lintr::lint()" ".*\.\(r\|rmd\)\$" "r" TestCodebase "RAKU" "raku" "raku -c" ".*\.\(raku\|rakumod\|rakutest\|pm6\|pl6\|p6\)\$" "raku" TestCodebase "RUBY" "rubocop" "rubocop -c ${RUBY_LINTER_RULES}" ".*\.\(rb\)\$" "ruby" TestCodebase "SHELL_SHFMT" "shfmt" "shfmt -d" ".*\.\(sh\|bash\|dash\|ksh\)\$" "shell_shfmt" TestCodebase "SNAKEMAKE_LINT" "snakemake" "snakemake --lint -s" ".*\.\(smk\)\$" "snakemake" TestCodebase "SNAKEMAKE_SNAKEFMT" "snakefmt" "snakefmt --config ${SNAKEMAKE_SNAKEFMT_LINTER_RULES} --diff" ".*\.\(smk\)\$" "snakemake" TestCodebase "STATES" "asl-validator" "asl-validator --json-path" ".*\.\(json\)\$" "states" TestCodebase "SQL" "sql-lint" "sql-lint --config ${SQL_LINTER_RULES}" ".*\.\(sql\)\$" "sql" TestCodebase "TERRAFORM" "tflint" "tflint -c ${TERRAFORM_LINTER_RULES}" ".*\.\(tf\)\$" "terraform" TestCodebase "TERRAFORM_TERRASCAN" "terrascan" "terrascan scan -p /root/.terrascan/pkg/policies/opa/rego/ -t aws -f " ".*\.\(tf\)\$" "terraform_terrascan" TestCodebase "TYPESCRIPT_ES" "eslint" "eslint --no-eslintrc -c ${TYPESCRIPT_LINTER_RULES}" ".*\.\(ts\)\$" "typescript" TestCodebase "TYPESCRIPT_STANDARD" "standard" "standard --parser @typescript-eslint/parser --plugin @typescript-eslint/eslint-plugin ${TYPESCRIPT_STANDARD_LINTER_RULES}" ".*\.\(ts\)\$" "typescript" TestCodebase "XML" "xmllint" "xmllint" ".*\.\(xml\)\$" "xml" TestCodebase "YAML" "yamllint" "yamllint -c ${YAML_LINTER_RULES}" ".*\.\(yml\|yaml\)\$" "yaml" ################# # Footer prints # ################# # Call the footer to display run information # and exit with error code Footer } ################################################################################ #### Function LintAnsibleFiles ################################################# function LintAnsibleFiles() { ###################### # Create Print Array # ###################### PRINT_ARRAY=() ################ # print header # ################ PRINT_ARRAY+=("") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("Linting [Ansible] files...") PRINT_ARRAY+=("----------------------------------------------") PRINT_ARRAY+=("----------------------------------------------") ###################### # Name of the linter # ###################### LINTER_NAME="ansible-lint" ########################################### # Validate we have ansible-lint installed # ########################################### VALIDATE_INSTALL_CMD=$(command -v "${LINTER_NAME}" 2>&1) ####################### # Load the error code # ####################### ERROR_CODE=$? ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then # Failed error "Failed to find ${LINTER_NAME} in system!" fatal "[${VALIDATE_INSTALL_CMD}]" else # Success debug "Successfully found binary in system" debug "Location:[${VALIDATE_INSTALL_CMD}]" fi ########################## # Initialize empty Array # ########################## LIST_FILES=() ####################### # Create flag to skip # ####################### SKIP_FLAG=0 ###################################################### # Only go into ansible linter if we have base folder # ###################################################### if [ -d "${ANSIBLE_DIRECTORY}" ]; then ################################# # Get list of all files to lint # ################################# mapfile -t LIST_FILES < <(ls "${ANSIBLE_DIRECTORY}"/*.{yaml,yml} 2>&1) ############################################################### # Set the list to empty if only MD and TXT files were changed # ############################################################### # No need to run the full ansible checks on read only file changes if [ "${READ_ONLY_CHANGE_FLAG}" -eq 0 ]; then ########################## # Set the array to empty # ########################## LIST_FILES=() ################################### # Send message that were skipping # ################################### debug "- Skipping Ansible lint run as file(s) that were modified were read only..." ############################ # Create flag to skip loop # ############################ SKIP_FLAG=1 fi #################################### # Check if we have data to look at # #################################### if [ ${SKIP_FLAG} -eq 0 ]; then for LINE in "${PRINT_ARRAY[@]}"; do ######################### # Print the header line # ######################### info "${LINE}" done fi ######################################## # Prepare context if TAP output format # ######################################## if IsTAP; then TMPFILE=$(mktemp -q "/tmp/super-linter-${FILE_TYPE}.XXXXXX") INDEX=0 mkdir -p "${REPORT_OUTPUT_FOLDER}" REPORT_OUTPUT_FILE="${REPORT_OUTPUT_FOLDER}/super-linter-${FILE_TYPE}.${OUTPUT_FORMAT}" fi ################## # Lint the files # ################## for FILE in "${LIST_FILES[@]}"; do ######################################## # Make sure we dont lint certain files # ######################################## if [[ ${FILE} == *"vault.yml"* ]] || [[ ${FILE} == *"galaxy.yml"* ]] || [[ ${FILE} == *"vault.yaml"* ]] || [[ ${FILE} == *"galaxy.yaml"* ]]; then # This is a file we dont look at continue fi ################################## # Increase the linted file index # ################################## (("INDEX++")) #################### # Get the filename # #################### FILE_NAME=$(basename "${ANSIBLE_DIRECTORY}/${FILE}" 2>&1) ############## # File print # ############## info "---------------------------" info "File:[${FILE}]" ################################ # Lint the file with the rules # ################################ LINT_CMD=$("${LINTER_NAME}" -v -c "${ANSIBLE_LINTER_RULES}" "${ANSIBLE_DIRECTORY}/${FILE}" 2>&1) ####################### # Load the error code # ####################### ERROR_CODE=$? ############################## # Check the shell for errors # ############################## if [ ${ERROR_CODE} -ne 0 ]; then ######### # Error # ######### error "Found errors in [${LINTER_NAME}] linter!" error "[${LINT_CMD}]" # Increment error count ((ERRORS_FOUND_ANSIBLE++)) ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then NotOkTap "${INDEX}" "${FILE}" "${TMPFILE}" AddDetailedMessageIfEnabled "${LINT_CMD}" "${TMPFILE}" fi else ########### # Success # ########### info " - File:${F[W]}[${FILE_NAME}]${F[B]} was linted with ${F[W]}[${LINTER_NAME}]${F[B]} successfully" ####################################################### # Store the linting as a temporary file in TAP format # ####################################################### if IsTAP; then OkTap "${INDEX}" "${FILE}" "${TMPFILE}" fi fi done ################################# # Generate report in TAP format # ################################# if IsTAP && [ ${INDEX} -gt 0 ]; then HeaderTap "${INDEX}" "${REPORT_OUTPUT_FILE}" cat "${TMPFILE}" >>"${REPORT_OUTPUT_FILE}" fi else ######################## # No Ansible dir found # ######################## warn "No Ansible base directory found at:[${ANSIBLE_DIRECTORY}]" debug "skipping ansible lint" fi } ################################################################################ #### Function IsTap ############################################################ function IsTAP() { if [ "${OUTPUT_FORMAT}" == "tap" ]; then return 0 else return 1 fi } ################################################################################ #### Function TransformTAPDetails ############################################## function TransformTAPDetails() { DATA=${1} if [ -n "${DATA}" ] && [ "${OUTPUT_DETAILS}" == "detailed" ]; then ######################################################### # Transform new lines to \\n, remove colours and colons # ######################################################### echo "${DATA}" | awk 'BEGIN{RS="\n";ORS="\\n"}1' | sed -r "s/\x1B\[([0-9]{1,3}(;[0-9]{1,2})?)?[mGK]//g" | tr ':' ' ' fi } ################################################################################ #### Function HeaderTap ######################################################## function HeaderTap() { ################ # Pull in Vars # ################ INDEX="${1}" # File being validated OUTPUT_FILE="${2}" # Output location ################### # Print the goods # ################### printf "TAP version 13\n1..%s\n" "${INDEX}" >"${OUTPUT_FILE}" } ################################################################################ #### Function OkTap ############################################################ function OkTap() { ################ # Pull in Vars # ################ INDEX="${1}" # Location FILE="${2}" # File being validated TEMP_FILE="${3}" # Temp file location ################### # Print the goods # ################### echo "ok ${INDEX} - ${FILE}" >>"${TEMP_FILE}" } ################################################################################ #### Function NotOkTap ######################################################### function NotOkTap() { ################ # Pull in Vars # ################ INDEX="${1}" # Location FILE="${2}" # File being validated TEMP_FILE="${3}" # Temp file location ################### # Print the goods # ################### echo "not ok ${INDEX} - ${FILE}" >>"${TEMP_FILE}" } ################################################################################ #### Function AddDetailedMessageIfEnabled ###################################### function AddDetailedMessageIfEnabled() { ################ # Pull in Vars # ################ LINT_CMD="${1}" # Linter command TEMP_FILE="${2}" # Temp file #################### # Check the return # #################### DETAILED_MSG=$(TransformTAPDetails "${LINT_CMD}") if [ -n "${DETAILED_MSG}" ]; then printf " ---\n message: %s\n ...\n" "${DETAILED_MSG}" >>"${TEMP_FILE}" fi }