#!/usr/bin/env bash

################################################################################
################################################################################
########### Super-Linter linting Functions @admiralawkbar ######################
################################################################################
################################################################################
########################## FUNCTION CALLS BELOW ################################
################################################################################
################################################################################
#### Function LintCodebase #####################################################
function LintCodebase() {
  ####################
  # Pull in the vars #
  ####################
  FILE_TYPE="$1" && shift       # Pull the variable and remove from array path  (Example: JSON)
  LINTER_NAME="$1" && shift     # Pull the variable and remove from array path  (Example: jsonlint)
  LINTER_COMMAND="$1" && shift  # Pull the variable and remove from array path  (Example: jsonlint -c ConfigFile /path/to/file)
  FILE_EXTENSIONS="$1" && shift # Pull the variable and remove from array path  (Example: *.json)
  FILE_ARRAY=("$@")             # Array of files to validate                    (Example: $FILE_ARRAY_JSON)

  ######################
  # Create Print Array #
  ######################
  PRINT_ARRAY=()

  ################
  # print header #
  ################
  PRINT_ARRAY+=("")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("Linting [$FILE_TYPE] files...")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("----------------------------------------------")

  #####################################
  # Validate we have linter installed #
  #####################################
  VALIDATE_INSTALL_CMD=$(command -v "$LINTER_NAME" 2>&1)

  #######################
  # Load the error code #
  #######################
  ERROR_CODE=$?

  ##############################
  # Check the shell for errors #
  ##############################
  if [ $ERROR_CODE -ne 0 ]; then
    # Failed
    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find [$LINTER_NAME] in system!${NC}"
    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]${NC}"
    exit 1
  else
    # Success
    if [[ $ACTIONS_RUNNER_DEBUG == "true" ]]; then
      echo -e "${NC}${F[B]}Successfully found binary for ${F[W]}[$LINTER_NAME]${F[B]} in system location: ${F[W]}[$VALIDATE_INSTALL_CMD]${NC}"
    fi
  fi

  ##########################
  # Initialize empty Array #
  ##########################
  LIST_FILES=()

  ################
  # Set the flag #
  ################
  SKIP_FLAG=0

  ############################################################
  # Check to see if we need to go through array or all files #
  ############################################################
  if [ ${#FILE_ARRAY[@]} -eq 0 ] && [ "$VALIDATE_ALL_CODEBASE" == "false" ]; then
    # No files found in commit and user has asked to not validate code base
    SKIP_FLAG=1
    # echo " - No files found in changeset to lint for language:[$FILE_TYPE]"
  elif [ ${#FILE_ARRAY[@]} -ne 0 ]; then
    # We have files added to array of files to check
    LIST_FILES=("${FILE_ARRAY[@]}") # Copy the array into list
  else
    ###############################################################################
    # Set the file seperator to newline to allow for grabbing objects with spaces #
    ###############################################################################
    IFS=$'\n'

    #################################
    # Get list of all files to lint #
    #################################
    mapfile -t LIST_FILES < <(find "$GITHUB_WORKSPACE" -type f -regex "$FILE_EXTENSIONS" 2>&1)

    ###########################
    # Set IFS back to default #
    ###########################
    IFS="$DEFAULT_IFS"

    ############################################################
    # Set it back to empty if loaded with blanks from scanning #
    ############################################################
    if [ ${#LIST_FILES[@]} -lt 1 ]; then
      ######################
      # Set to empty array #
      ######################
      LIST_FILES=()
      #############################
      # Skip as we found no files #
      #############################
      SKIP_FLAG=1
    fi
  fi

  ###############################
  # Check if any data was found #
  ###############################
  if [ $SKIP_FLAG -eq 0 ]; then
    ######################
    # Print Header array #
    ######################
    for LINE in "${PRINT_ARRAY[@]}"; do
      #########################
      # Print the header info #
      #########################
      echo "$LINE"
    done

    ##################
    # Lint the files #
    ##################
    for FILE in "${LIST_FILES[@]}"; do
      #####################
      # Get the file name #
      #####################
      FILE_NAME=$(basename "$FILE" 2>&1)

      #####################################################
      # Make sure we dont lint node modules or test cases #
      #####################################################
      if [[ $FILE == *"node_modules"* ]]; then
        # This is a node modules file
        continue
      elif [[ $FILE == *"$TEST_CASE_FOLDER"* ]]; then
        # This is the test cases, we should always skip
        continue
      fi

      ##############
      # File print #
      ##############
      echo "---------------------------"
      echo "File:[$FILE]"

      ####################
      # Set the base Var #
      ####################
      LINT_CMD=''

      ####################################
      # Corner case for pwsh subshell    #
      #  - PowerShell (PSScriptAnalyzer) #
      #  - ARM        (arm-ttk)          #
      ####################################
      if [[ $FILE_TYPE == "POWERSHELL" ]] || [[ $FILE_TYPE == "ARM" ]]; then
        ################################
        # Lint the file with the rules #
        ################################
        # Need to run PowerShell commands using pwsh -c, also exit with exit code from inner subshell
        LINT_CMD=$(
          cd "$GITHUB_WORKSPACE" || exit
          pwsh -NoProfile -NoLogo -Command "$LINTER_COMMAND $FILE; if (\$Error.Count) { exit 1 }"
          exit $? 2>&1
        )
      else
        ################################
        # Lint the file with the rules #
        ################################
        LINT_CMD=$(
          cd "$GITHUB_WORKSPACE" || exit
          $LINTER_COMMAND "$FILE" 2>&1
        )
      fi

      #######################
      # Load the error code #
      #######################
      ERROR_CODE=$?

      ##############################
      # Check the shell for errors #
      ##############################
      if [ $ERROR_CODE -ne 0 ]; then
        #########
        # Error #
        #########
        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]${NC}"
        # Increment the error count
        (("ERRORS_FOUND_$FILE_TYPE++"))
      else
        ###########
        # Success #
        ###########
        echo -e "${NC}${F[B]} - File:${F[W]}[$FILE_NAME]${F[B]} was linted with ${F[W]}[$LINTER_NAME]${F[B]} successfully${NC}"
      fi
    done
  fi
}
################################################################################
#### Function TestCodebase #####################################################
function TestCodebase() {
  ####################
  # Pull in the vars #
  ####################
  FILE_TYPE="$1"             # Pull the variable and remove from array path  (Example: JSON)
  LINTER_NAME="$2"           # Pull the variable and remove from array path  (Example: jsonlint)
  LINTER_COMMAND="$3"        # Pull the variable and remove from array path  (Example: jsonlint -c ConfigFile /path/to/file)
  FILE_EXTENSIONS="$4"       # Pull the variable and remove from array path  (Example: *.json)
  INDVIDUAL_TEST_FOLDER="$5" # Folder for specific tests
  TESTS_RAN=0                # Incremented when tests are ran, this will help find failed finds

  ################
  # print header #
  ################
  echo ""
  echo "----------------------------------------------"
  echo "----------------------------------------------"
  echo "Testing Codebase [$FILE_TYPE] files..."
  echo "----------------------------------------------"
  echo "----------------------------------------------"
  echo ""

  #####################################
  # Validate we have linter installed #
  #####################################
  VALIDATE_INSTALL_CMD=$(command -v "$LINTER_NAME" 2>&1)

  #######################
  # Load the error code #
  #######################
  ERROR_CODE=$?

  ##############################
  # Check the shell for errors #
  ##############################
  if [ $ERROR_CODE -ne 0 ]; then
    # Failed
    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find [$LINTER_NAME] in system!${NC}"
    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]${NC}"
    exit 1
  else
    # Success
    echo -e "${NC}${F[B]}Successfully found binary for ${F[W]}[$LINTER_NAME]${F[B]} in system location: ${F[W]}[$VALIDATE_INSTALL_CMD]${NC}"
  fi

  ##########################
  # Initialize empty Array #
  ##########################
  LIST_FILES=()

  #################################
  # Get list of all files to lint #
  #################################
  mapfile -t LIST_FILES < <(find "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER/$INDVIDUAL_TEST_FOLDER" -type f -regex "$FILE_EXTENSIONS" ! -path "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER/ansible/ghe-initialize/*" 2>&1)

  ##################
  # Lint the files #
  ##################
  for FILE in "${LIST_FILES[@]}"; do
    #####################
    # Get the file name #
    #####################
    FILE_NAME=$(basename "$FILE" 2>&1)

    ############################
    # Get the file pass status #
    ############################
    # Example: markdown_good_1.md -> good
    FILE_STATUS=$(echo "$FILE_NAME" | cut -f2 -d'_')

    #########################################################
    # If not found, assume it should be linted successfully #
    #########################################################
    if [ -z "$FILE_STATUS" ] || [[ $FILE == *"README"* ]]; then
      ##################################
      # Set to good for proper linting #
      ##################################
      FILE_STATUS="good"
    fi

    ##############
    # File print #
    ##############
    echo "---------------------------"
    echo "File:[$FILE]"

    ########################
    # Set the lint command #
    ########################
    LINT_CMD=''

    #######################################
    # Check if docker and get folder name #
    #######################################
    if [[ $FILE_TYPE == "DOCKER" ]]; then
      if [[ $FILE == *"good"* ]]; then
        #############
        # Good file #
        #############
        FILE_STATUS='good'
      else
        ############
        # Bad file #
        ############
        FILE_STATUS='bad'
      fi
    fi

    #####################
    # Check for ansible #
    #####################
    if [[ $FILE_TYPE == "ANSIBLE" ]]; then
      ########################################
      # Make sure we dont lint certain files #
      ########################################
      if [[ $FILE == *"vault.yml"* ]] || [[ $FILE == *"galaxy.yml"* ]]; then
        # This is a file we dont look at
        continue
      fi

      ################################
      # Lint the file with the rules #
      ################################
      LINT_CMD=$(
        cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER/$INDVIDUAL_TEST_FOLDER" || exit
        $LINTER_COMMAND "$FILE" 2>&1
      )
    elif [[ $FILE_TYPE == "POWERSHELL" ]] || [[ $FILE_TYPE == "ARM" ]]; then
      ################################
      # Lint the file with the rules #
      ################################
      # Need to run PowerShell commands using pwsh -c, also exit with exit code from inner subshell
      LINT_CMD=$(
        cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit
        pwsh -NoProfile -NoLogo -Command "$LINTER_COMMAND $FILE; if (\$Error.Count) { exit 1 }"
        exit $? 2>&1
      )
    else
      ################################
      # Lint the file with the rules #
      ################################
      LINT_CMD=$(
        cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit
        $LINTER_COMMAND "$FILE" 2>&1
      )
    fi

    #######################
    # Load the error code #
    #######################
    ERROR_CODE=$?

    ########################################
    # Check for if it was supposed to pass #
    ########################################
    if [[ $FILE_STATUS == "good" ]]; then
      ##############################
      # Check the shell for errors #
      ##############################
      if [ $ERROR_CODE -ne 0 ]; then
        #########
        # Error #
        #########
        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC} Linter CMD:[$LINTER_COMMAND $FILE]${NC}"
        # Increment the error count
        (("ERRORS_FOUND_$FILE_TYPE++"))
        # Increment counter that check was ran
        ((TESTS_RAN++))
      else
        ###########
        # Success #
        ###########
        echo -e "${NC}${F[B]} - File:${F[W]}[$FILE_NAME]${F[B]} was linted with ${F[W]}[$LINTER_NAME]${F[B]} successfully${NC}"
        # Increment counter that check was ran
        ((TESTS_RAN++))
      fi
    else
      #######################################
      # File status = bad, this should fail #
      #######################################
      ##############################
      # Check the shell for errors #
      ##############################
      if [ $ERROR_CODE -eq 0 ]; then
        #########
        # Error #
        #########
        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} This file should have failed test case!${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC} Linter CMD:[$LINTER_COMMAND $FILE]${NC}"
        # Increment the error count
        (("ERRORS_FOUND_$FILE_TYPE++"))
        # Increment counter that check was ran
        ((TESTS_RAN++))
      else
        ###########
        # Success #
        ###########
        echo -e "${NC}${F[B]} - File:${F[W]}[$FILE_NAME]${F[B]} failed test case with ${F[W]}[$LINTER_NAME]${F[B]} successfully${NC}"
        # Increment counter that check was ran
        ((TESTS_RAN++))
      fi
    fi
  done

  ##############################
  # Validate we ran some tests #
  ##############################
  if [ "$TESTS_RAN" -eq 0 ]; then
    #################################################
    # We failed to find files and no tests were ran #
    #################################################
    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find any tests ran for the Linter:[$LINTER_NAME]${NC}"!
    echo "Please validate logic or that tests exist!"
    exit 1
  fi
}
################################################################################
#### Function RunTestCases #####################################################
function RunTestCases() {
  # This loop will run the test cases and exclude user code
  # This is called from the automation process to validate new code
  # When a PR is opened, the new code is validated with the default branch
  # version of linter.sh, and a new container is built with the latest codebase
  # for testing. That container is spun up, and ran,
  # with the flag: TEST_CASE_RUN=true
  # So that the new code can be validated against the test cases

  #################
  # Header prints #
  #################
  echo ""
  echo "----------------------------------------------"
  echo "-------------- TEST CASE RUN -----------------"
  echo "----------------------------------------------"
  echo ""

  #######################
  # Test case languages #
  #######################
  # TestCodebase "Language" "Linter" "Linter-command" "Regex to find files" "Test Folder"
  TestCodebase "YML" "yamllint" "yamllint -c $YAML_LINTER_RULES" ".*\.\(yml\|yaml\)\$" "yml"
  TestCodebase "JSON" "jsonlint" "jsonlint" ".*\.\(json\)\$" "json"
  TestCodebase "XML" "xmllint" "xmllint" ".*\.\(xml\)\$" "xml"
  TestCodebase "MARKDOWN" "markdownlint" "markdownlint -c $MD_LINTER_RULES" ".*\.\(md\)\$" "markdown"
  TestCodebase "BASH" "shellcheck" "shellcheck --color" ".*\.\(sh\|bash\|dash\|ksh\)\$" "shell"
  TestCodebase "PYTHON" "pylint" "pylint --rcfile $PYTHON_LINTER_RULES" ".*\.\(py\)\$" "python"
  TestCodebase "PERL" "perl" "perl -Mstrict -cw" ".*\.\(pl\)\$" "perl"
  TestCodebase "RAKU" "raku" "raku -c" ".*\.\(raku\|rakumod\|rakutest\|pm6\|pl6\|p6\)\$" "raku"
  TestCodebase "PHP" "php" "php -l" ".*\.\(php\)\$" "php"
  TestCodebase "RUBY" "rubocop" "rubocop -c $RUBY_LINTER_RULES" ".*\.\(rb\)\$" "ruby"
  TestCodebase "GO" "golangci-lint" "golangci-lint run -c $GO_LINTER_RULES" ".*\.\(go\)\$" "golang"
  TestCodebase "COFFEESCRIPT" "coffeelint" "coffeelint -f $COFFEESCRIPT_LINTER_RULES" ".*\.\(coffee\)\$" "coffeescript"
  TestCodebase "JAVASCRIPT_ES" "eslint" "eslint --no-eslintrc -c $JAVASCRIPT_LINTER_RULES" ".*\.\(js\)\$" "javascript"
  TestCodebase "JAVASCRIPT_STANDARD" "standard" "standard $JAVASCRIPT_STANDARD_LINTER_RULES" ".*\.\(js\)\$" "javascript"
  TestCodebase "TYPESCRIPT_ES" "eslint" "eslint --no-eslintrc -c $TYPESCRIPT_LINTER_RULES" ".*\.\(ts\)\$" "typescript"
  TestCodebase "TYPESCRIPT_STANDARD" "standard" "standard --parser @typescript-eslint/parser --plugin @typescript-eslint/eslint-plugin $TYPESCRIPT_STANDARD_LINTER_RULES" ".*\.\(ts\)\$" "typescript"
  TestCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint -c $DOCKER_LINTER_RULES" ".*\(Dockerfile\)\$" "docker"
  TestCodebase "ANSIBLE" "ansible-lint" "ansible-lint -v -c $ANSIBLE_LINTER_RULES" ".*\.\(yml\|yaml\)\$" "ansible"
  TestCodebase "TERRAFORM" "tflint" "tflint -c $TERRAFORM_LINTER_RULES" ".*\.\(tf\)\$" "terraform"
  TestCodebase "CFN" "cfn-lint" "cfn-lint --config-file $CFN_LINTER_RULES" ".*\.\(json\|yml\|yaml\)\$" "cfn"
  TestCodebase "POWERSHELL" "pwsh" "Invoke-ScriptAnalyzer -EnableExit -Settings $POWERSHELL_LINTER_RULES -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$" "powershell"
  TestCodebase "ARM" "arm-ttk" "Import-Module $ARM_TTK_PSD1 ; \$config = \$(Import-PowerShellDataFile -Path $ARM_LINTER_RULES) ; Test-AzTemplate @config -TemplatePath" ".*\.\(json\)\$" "arm"
  TestCodebase "CSS" "stylelint" "stylelint --config $CSS_LINTER_RULES" ".*\.\(css\)\$" "css"
  TestCodebase "ENV" "dotenv-linter" "dotenv-linter" ".*\.\(env\)\$" "env"
  TestCodebase "CLOJURE" "clj-kondo" "clj-kondo --config $CLOJURE_LINTER_RULES --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$" "clojure"
  TestCodebase "KOTLIN" "ktlint" "ktlint" ".*\.\(kt\|kts\)\$" "kotlin"
  TestCodebase "PROTOBUF" "protolint" "protolint lint --config_path $PROTOBUF_LINTER_RULES" ".*\.\(proto\)\$" "protobuf"
  TestCodebase "OPENAPI" "spectral" "spectral lint -r $OPENAPI_LINTER_RULES" ".*\.\(ymlopenapi\|jsonopenapi\)\$" "openapi"
  TestCodebase "DART" "dart" "dartanalyzer --fatal-infos  --options $DART_LINTER_RULES" ".*\.\(dart\)\$" "dart"
  TestCodebase "HTML" "htmlhint" "htmlhint --config $HTML_LINTER_RULES" ".*\.\(html\)\$" "html"

  #################
  # Footer prints #
  #################
  # Call the footer to display run information
  # and exit with error code
  Footer
}
################################################################################
#### Function LintAnsibleFiles #################################################
function LintAnsibleFiles() {
  ######################
  # Create Print Array #
  ######################
  PRINT_ARRAY=()

  ################
  # print header #
  ################
  PRINT_ARRAY+=("")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("Linting [Ansible] files...")
  PRINT_ARRAY+=("----------------------------------------------")
  PRINT_ARRAY+=("----------------------------------------------")

  ######################
  # Name of the linter #
  ######################
  LINTER_NAME="ansible-lint"

  ###########################################
  # Validate we have ansible-lint installed #
  ###########################################
  VALIDATE_INSTALL_CMD=$(command -v "$LINTER_NAME" 2>&1)

  #######################
  # Load the error code #
  #######################
  ERROR_CODE=$?

  ##############################
  # Check the shell for errors #
  ##############################
  if [ $ERROR_CODE -ne 0 ]; then
    # Failed
    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find $LINTER_NAME in system!${NC}"
    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]${NC}"
    exit 1
  else
    # Success
    if [[ $ACTIONS_RUNNER_DEBUG == "true" ]]; then
      # Success
      echo -e "${NC}${F[B]}Successfully found binary in system${NC}"
      echo "Location:[$VALIDATE_INSTALL_CMD]"
    fi
  fi

  ##########################
  # Initialize empty Array #
  ##########################
  LIST_FILES=()

  #######################
  # Create flag to skip #
  #######################
  SKIP_FLAG=0

  ######################################################
  # Only go into ansible linter if we have base folder #
  ######################################################
  if [ -d "$ANSIBLE_DIRECTORY" ]; then

    #################################
    # Get list of all files to lint #
    #################################
    mapfile -t LIST_FILES < <(ls "$ANSIBLE_DIRECTORY/*.yml" 2>&1)

    ###############################################################
    # Set the list to empty if only MD and TXT files were changed #
    ###############################################################
    # No need to run the full ansible checks on read only file changes
    if [ "$READ_ONLY_CHANGE_FLAG" -eq 0 ]; then
      ##########################
      # Set the array to empty #
      ##########################
      LIST_FILES=()
      ###################################
      # Send message that were skipping #
      ###################################
      #echo "- Skipping Ansible lint run as file(s) that were modified were read only..."
      ############################
      # Create flag to skip loop #
      ############################
      SKIP_FLAG=1
    fi

    ####################################
    # Check if we have data to look at #
    ####################################
    if [ $SKIP_FLAG -eq 0 ]; then
      for LINE in "${PRINT_ARRAY[@]}"; do
        #########################
        # Print the header line #
        #########################
        echo "$LINE"
      done
    fi

    ##################
    # Lint the files #
    ##################
    for FILE in "${LIST_FILES[@]}"; do

      ########################################
      # Make sure we dont lint certain files #
      ########################################
      if [[ $FILE == *"vault.yml"* ]] || [[ $FILE == *"galaxy.yml"* ]]; then
        # This is a file we dont look at
        continue
      fi

      ####################
      # Get the filename #
      ####################
      FILE_NAME=$(basename "$ANSIBLE_DIRECTORY/$FILE" 2>&1)

      ##############
      # File print #
      ##############
      echo "---------------------------"
      echo "File:[$FILE]"

      ################################
      # Lint the file with the rules #
      ################################
      LINT_CMD=$("$LINTER_NAME" -v -c "$ANSIBLE_LINTER_RULES" "$ANSIBLE_DIRECTORY/$FILE" 2>&1)

      #######################
      # Load the error code #
      #######################
      ERROR_CODE=$?

      ##############################
      # Check the shell for errors #
      ##############################
      if [ $ERROR_CODE -ne 0 ]; then
        #########
        # Error #
        #########
        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!${NC}"
        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]${NC}"
        # Increment error count
        ((ERRORS_FOUND_ANSIBLE++))
      else
        ###########
        # Success #
        ###########
        echo -e "${NC}${F[B]} - File:${F[W]}[$FILE_NAME]${F[B]} was linted with ${F[W]}[$LINTER_NAME]${F[B]} successfully${NC}"
      fi
    done
  else # No ansible directory found in path
    ###############################
    # Check to see if debug is on #
    ###############################
    if [[ $ACTIONS_RUNNER_DEBUG == "true" ]]; then
      ########################
      # No Ansible dir found #
      ########################
      echo -e "${NC}${F[Y]}WARN!${NC} No Ansible base directory found at:[$ANSIBLE_DIRECTORY]${NC}"
      echo "skipping ansible lint"
    fi
  fi
}