Lint the whole Ansible directory (#2576)

.automation/test/ansible/README.md

@@ -4,7 +4,7 @@ This folder holds the test cases for **Ansible**.
 
 ## Additional Docs
 
-The folder **ghe-initialize** is pulled from the **GitHub-Demo-Stack** and is a valid **Ansible** role.
+The folder **roles/ghe-initialize** is pulled from the **GitHub-Demo-Stack** and is a valid **Ansible** role.
 
 ## Good Test Cases
 

.automation/test/ansible/ansible_bad_1.yml

@@ -1,39 +0,0 @@
----
-###########################################
-###########################################
-#### GitHub Services-Engineering Stack ####
-####                                   ####
-#### GHE Primary HA backup-utils ONLY  ####
-###########################################
-###########################################
-
-###############################
-# Description of the playbook #
-###############################
-# description: Builds GHE Primary, HA, and backup-utils.
-# detailed_description: Builds GHE Primary, HA, and backup-utils.
-
-######################
-## Configure GitHub ##
-######################
-- hosts: Yo-Mama
-  vars:
-    github_host: "{{ hostvars['github_primary'].ansible_host }}"
-    probot_server_ip: "{{ hostvars['backup-utils'].ansible_host }}"
-  roles:
-    - role: ghe-initialize
-
-##########################################
-## Run ghe-config-apply for all changes ##
-##########################################
-# Due to us hot loading some data into GHE, the final
-# run of ghe-config-apply hangs and leaves the system in an odd state
-# The simplist option is to run the process
-# 1 more time at the end to solve the issue
-- hosts: github_primary
-  tasks:
-    - block:
-      include_role:
-        tasks_from: ghe-config-apply.yml
-      tags:
-        - github

.automation/test/ansible/ansible_good_1.yml

@@ -1,42 +0,0 @@
----
-###########################################
-###########################################
-#### GitHub Services-Engineering Stack ####
-####                                   ####
-#### GHE Primary HA backup-utils ONLY  ####
-###########################################
-###########################################
-
-###############################
-# Description of the playbook #
-###############################
-# description: Builds GHE Primary, HA, and backup-utils.
-# detailed_description: Builds GHE Primary, HA, and backup-utils.
-
-######################
-## Configure GitHub ##
-######################
-- hosts: github_primary
-  vars:
-    demo_github_initial_user: "{{ hostvars['localhost'].local_user }}"
-    github_host: "{{ hostvars['github_primary'].ansible_host }}"
-    probot_server_ip: "{{ hostvars['backup-utils'].ansible_host }}"
-  roles:
-    - role: ghe_initialize
-
-##########################################
-## Run ghe-config-apply for all changes ##
-##########################################
-# Due to us hot loading some data into GHE, the final
-# run of ghe-config-apply hangs and leaves the system in an odd state
-# The simplist option is to run the process
-# 1 more time at the end to solve the issue
-- hosts: github_primary
-  tasks:
-    - block:
-        - name: GHE-Config-Apply
-          include_role:
-            name: ghe_initialize
-            tasks_from: ghe-config-apply.yml
-      tags:
-        - github

.automation/test/ansible/inventory/hosts.yml

@@ -0,0 +1,5 @@
+---
+all:
+  hosts:
+    test.example.com: null
+...

.automation/test/ansible/playbooks/ansible_good_1.yml

@@ -0,0 +1,8 @@
+---
+- hosts: github_primary
+  vars:
+    demo_github_initial_user: "{{ hostvars['localhost'].local_user }}"
+    github_host: "{{ hostvars['github_primary'].ansible_host }}"
+    probot_server_ip: "{{ hostvars['backup-utils'].ansible_host }}"
+  roles:
+    - role: ghe_initialize

.automation/test/ansible/requirements.yml

@@ -0,0 +1,4 @@
+---
+collections:
+  - ansible.posix
+...

.github/linters/.ansible-lint.yml

@@ -1,30 +1,9 @@
 ---
-##########################
-##########################
-## Ansible Linter rules ##
-##########################
-##########################
-
-#############################
-# Exclude paths from linter #
-#############################
-# exclude_paths:
-
 ########################
 # Make output parsable #
 ########################
 parseable: true
 
-#######################
-# Set output to quiet #
-#######################
-quiet: true
-
-#####################
-# Path to rules dir #
-#####################
-# rulesdir:
-
 ################
 # Tags to skip #
 ################
@@ -36,11 +15,6 @@ skip_list:
   - 'command-instead-of-shell'  # Allow use of shell when you want
   - 'no-handler'  # Allow step to run like handler
 
-##################
-# Tags to follow #
-##################
-# tags:
-
 #############
 # Use rules #
 #############
@@ -49,4 +23,4 @@ use_default_rules: true
 #################
 # Set verbosity #
 #################
-verbosity: 1
+verbosity: 2

README.md

@@ -278,6 +278,7 @@ But if you wish to select or exclude specific linters, we give you full control
 | **ACTIONS_RUNNER_DEBUG**           | `false`                         | Flag to enable additional information about the linter, versions, and additional output.                                                                                                                             |
 | **ANSIBLE_CONFIG_FILE**            | `.ansible-lint.yml`             | Filename for [Ansible-lint configuration](https://ansible-lint.readthedocs.io/en/latest/configuring.html#configuration-file) (ex: `.ansible-lint`, `.ansible-lint.yml`)                                              |
 | **ANSIBLE_DIRECTORY**              | `/ansible`                      | Flag to set the root directory for Ansible file location(s), relative to `DEFAULT_WORKSPACE`. Set to `.` to use the top-level of the `DEFAULT_WORKSPACE`.                                                            |
+| **ANSIBLE_ROLES_PATH**             | `${ANSIBLE_DIRECTORY}/roles`    | Path to the Ansible roles directory.                                                                                                                                                                                 |
 | **CSS_FILE_NAME**                  | `.stylelintrc.json`             | Filename for [Stylelint configuration](https://github.com/stylelint/stylelint) (ex: `.stylelintrc.yml`, `.stylelintrc.yaml`)                                                                                         |
 | **DEFAULT_BRANCH**                 | `master`                        | The name of the repository default branch.                                                                                                                                                                           |
 | **DEFAULT_WORKSPACE**              | `/tmp/lint`                     | The location containing files to lint if you are running locally.                                                                                                                                                    |
@@ -306,7 +307,7 @@ But if you wish to select or exclude specific linters, we give you full control
 | **MULTI_STATUS**                   | `true`                          | A status API is made for each language that is linted to make visual parsing easier.                                                                                                                                 |
 | **NATURAL_LANGUAGE_CONFIG_FILE**   | `.textlintrc`                   | Filename for [textlint configuration](https://textlint.github.io/docs/getting-started.html#configuration) (ex: `.textlintrc`)                                                                                        |
 | **PHP_CONFIG_FILE**                | `php.ini`                       | Filename for [PHP Configuration](https://www.php.net/manual/en/configuration.file.php) (ex: `php.ini`)                                                                                                               |
-| **PROTOBUF_CONFIG_FILE**           | `.protolintrc.yml`              | Filename for [protolint configuration](https://github.com/yoheimuta/protolint/blob/master/_example/config/.protolint.yaml) (ex: `.protolintrc.yml`)                                                                                                                                                    |
+| **PROTOBUF_CONFIG_FILE**           | `.protolintrc.yml`              | Filename for [protolint configuration](https://github.com/yoheimuta/protolint/blob/master/_example/config/.protolint.yaml) (ex: `.protolintrc.yml`)                                                                  |
 | **PYTHON_BLACK_CONFIG_FILE**       | `.python-black`                 | Filename for [black configuration](https://github.com/psf/black/blob/main/docs/guides/using_black_with_other_tools.md#black-compatible-configurations) (ex: `.isort.cfg`, `pyproject.toml`)                          |
 | **PYTHON_FLAKE8_CONFIG_FILE**      | `.flake8`                       | Filename for [flake8 configuration](https://flake8.pycqa.org/en/latest/user/configuration.html) (ex: `.flake8`, `tox.ini`)                                                                                           |
 | **PYTHON_ISORT_CONFIG_FILE**       | `.isort.cfg`                    | Filename for [isort configuration](https://pycqa.github.io/isort/docs/configuration/config_files.html) (ex: `.isort.cfg`, `pyproject.toml`)                                                                          |
@@ -316,11 +317,11 @@ But if you wish to select or exclude specific linters, we give you full control
 | **SCALAFMT_CONFIG_FILE**           | `.scalafmt.conf`                | Filename for [scalafmt configuration](https://scalameta.org/scalafmt/docs/configuration.html) (ex: `.scalafmt.conf`)                                                                                                 |
 | **SNAKEMAKE_SNAKEFMT_CONFIG_FILE** | `.snakefmt.toml`                | Filename for [Snakemake configuration](https://github.com/snakemake/snakefmt#configuration) (ex: `pyproject.toml`, `.snakefmt.toml`)                                                                                 |
 | **SSL_CERT_SECRET**                | `none`                          | SSL cert to add to the **Super-Linter** trust store. This is needed for users on `self-hosted` runners or need to inject the cert for security standards (ex. ${{ secrets.SSL_CERT }})                               |
-| **SSH_KEY**                        | `none`                          | SSH key that has access to your private repositories |
+| **SSH_KEY**                        | `none`                          | SSH key that has access to your private repositories                                                                                                                                                                 |
-| **SSH_SETUP_GITHUB**               | `false`                         | If set to `true`, adds the `github.com` SSH key to `known_hosts`. This is ignored if `SSH_KEY` is provided - i.e. the `github.com` SSH key is always added if `SSH_KEY` is provided |
+| **SSH_SETUP_GITHUB**               | `false`                         | If set to `true`, adds the `github.com` SSH key to `known_hosts`. This is ignored if `SSH_KEY` is provided - i.e. the `github.com` SSH key is always added if `SSH_KEY` is provided                                  |
-| **SSH_INSECURE_NO_VERIFY_GITHUB_KEY** | `false`                      | **INSECURE -** If set to `true`, does not verify the fingerprint of the github.com SSH key before adding this. This is not recommended! |
+| **SSH_INSECURE_NO_VERIFY_GITHUB_KEY** | `false`                      | **INSECURE -** If set to `true`, does not verify the fingerprint of the github.com SSH key before adding this. This is not recommended!                                                                              |
 | **SQL_CONFIG_FILE**                | `.sql-config.json`              | Filename for [SQL-Lint configuration](https://sql-lint.readthedocs.io/en/latest/files/configuration.html) (ex: `sql-config.json` , `.config.json`)                                                                   |
-| **SQLFLUFF_CONFIG_FILE**                | `/.sqlfluff`             | Filename for [SQLFLUFF configuration](https://docs.sqlfluff.com/en/stable/configuration.html) (ex: `/.sqlfluff`, `pyproject.toml`)                                                                   |
+| **SQLFLUFF_CONFIG_FILE**                | `/.sqlfluff`             | Filename for [SQLFLUFF configuration](https://docs.sqlfluff.com/en/stable/configuration.html) (ex: `/.sqlfluff`, `pyproject.toml`)                                                                                     |
 | **SUPPRESS_FILE_TYPE_WARN**        | `false`                         | If set to `true`, will hide warning messages about files without their proper extensions. Default is `false`                                                                                                         |
 | **SUPPRESS_POSSUM**                | `false`                         | If set to `true`, will hide the ASCII possum at top of log output. Default is `false`                                                                                                                                |
 | **TERRAFORM_TERRASCAN_CONFIG_FILE**| `terrascan.toml`                | Filename for [terrascan configuration](https://github.com/accurics/terrascan) (ex: `terrascan.toml`)                                                                                                                 |

lib/functions/buildFileList.sh

@@ -243,6 +243,16 @@ function BuildFileList() {
   done
   debug "---------------------------------------------"
 
+  #########################################
+  # Check if the Ansible directory exists #
+  #########################################
+  if [ -d "${ANSIBLE_DIRECTORY}" ]; then
+    debug "Adding ANSIBLE_DIRECTORY (${ANSIBLE_DIRECTORY}) to the list of files and directories to lint."
+    FILE_ARRAY_ANSIBLE+=("${ANSIBLE_DIRECTORY}")
+  else
+    debug "ANSIBLE_DIRECTORY (${ANSIBLE_DIRECTORY}) does NOT exist."
+  fi
+
   ################################################
   # Iterate through the array of all files found #
   ################################################
@@ -498,15 +508,6 @@ function BuildFileList() {
       ################################
       FILE_ARRAY_JSON+=("${FILE}")
 
-      ############################
-      # Check if file is Ansible #
-      ############################
-      if DetectAnsibleFile "${ANSIBLE_DIRECTORY}" "${FILE}"; then
-        ################################
-        # Append the file to the array #
-        ################################
-        FILE_ARRAY_ANSIBLE+=("${FILE}")
-      fi
       ############################
       # Check if file is OpenAPI #
       ############################
@@ -793,19 +794,6 @@ function BuildFileList() {
         ################################
         FILE_ARRAY_GITHUB_ACTIONS+=("${FILE}")
       fi
-      ############################
-      # Check if file is Ansible #
-      ############################
-      if [ -d "${ANSIBLE_DIRECTORY}" ]; then
-        if DetectAnsibleFile "${ANSIBLE_DIRECTORY}" "${FILE}"; then
-          ################################
-          # Append the file to the array #
-          ################################
-          FILE_ARRAY_ANSIBLE+=("${FILE}")
-        fi
-      else
-        debug "ANSIBLE_DIRECTORY (${ANSIBLE_DIRECTORY}) does NOT exist."
-      fi
 
       #####################################
       # Check if the file is CFN template #

lib/functions/detectFiles.sh

@@ -7,27 +7,6 @@
 ################################################################################
 ########################## FUNCTION CALLS BELOW ################################
 ################################################################################
-################################################################################
-################################################################################
-#### Function DetectAnsibleFile ################################################
-DetectAnsibleFile() {
-  ANSIBLE_DIRECTORY="${1}"
-  FILE="${2}"
-
-  debug "Checking if ${FILE} is an Ansible file. Ansible directory: ${ANSIBLE_DIRECTORY}..."
-
-  if [[ ${FILE} == *"vault.yml" ]] || [[ ${FILE} == *"galaxy.yml" ]] || [[ ${FILE} == *"vault.yaml" ]] || [[ ${FILE} == *"galaxy.yaml" ]]; then
-    debug "${FILE} is a file that super-linter ignores. Ignoring it..."
-    return 1
-  elif [[ "$(dirname "${FILE}")" == *"${ANSIBLE_DIRECTORY}"* ]]; then
-    debug "${FILE} is an Ansible-related file."
-    return 0
-  else
-    debug "${FILE} is NOT an Ansible-related file."
-    return 1
-  fi
-}
-################################################################################
 #### Function DetectActions ####################################################
 DetectActions() {
   FILE="${1}"

lib/functions/worker.sh

@@ -155,10 +155,16 @@ function LintCodebase() {
       fi
 
       INDIVIDUAL_TEST_FOLDER="${FILE_TYPE,,}" # Folder for specific tests. By convention, it's the lowercased FILE_TYPE
+      TEST_CASE_DIRECTORY="${TEST_CASE_FOLDER}/${INDIVIDUAL_TEST_FOLDER}"
+      debug "File: ${FILE}, FILE_NAME: ${FILE_NAME}, DIR_NAME:${DIR_NAME}, FILE_STATUS: ${FILE_STATUS}, INDIVIDUAL_TEST_FOLDER: ${INDIVIDUAL_TEST_FOLDER}, TEST_CASE_DIRECTORY: ${TEST_CASE_DIRECTORY}"
 
-      debug "File: ${FILE}, FILE_NAME: ${FILE_NAME}, DIR_NAME:${DIR_NAME}, FILE_STATUS: ${FILE_STATUS}, INDIVIDUAL_TEST_FOLDER: ${INDIVIDUAL_TEST_FOLDER}"
+      if [[ ${FILE_TYPE} != "ANSIBLE" ]]; then
+        # These linters expect files inside a directory, not a directory. So we add a trailing slash
+        TEST_CASE_DIRECTORY="${TEST_CASE_DIRECTORY}/"
+        debug "${FILE_TYPE} expects to lint individual files. Updated TEST_CASE_DIRECTORY to: ${TEST_CASE_DIRECTORY}"
+      fi
 
-      if [[ ${FILE} != *"${TEST_CASE_FOLDER}/${INDIVIDUAL_TEST_FOLDER}/"* ]] && [ "${TEST_CASE_RUN}" == "true" ]; then
+      if [[ ${FILE} != *"${TEST_CASE_DIRECTORY}"* ]] && [ "${TEST_CASE_RUN}" == "true" ]; then
         debug "Skipping ${FILE} because it's not in the test case directory for ${FILE_TYPE}..."
         continue
       fi
@@ -188,20 +194,10 @@ function LintCodebase() {
       # Check for ansible #
       #####################
       if [[ ${FILE_TYPE} == "ANSIBLE" ]]; then
-        #########################################
-        # Make sure we don't lint certain files #
-        #########################################
-        if [[ ${FILE} == *"vault.yml"* ]] || [[ ${FILE} == *"galaxy.yml"* ]]; then
-          # This is a file we don't look at
-          continue
-        fi
-
-        ################################
-        # Lint the file with the rules #
-        ################################
         LINT_CMD=$(
-          cd "${ANSIBLE_DIRECTORY}" || exit
+          debug "ANSIBLE_ROLES_PATH: ${ANSIBLE_ROLES_PATH}, LINTER_COMMAND:${LINTER_COMMAND}, FILE: ${FILE}"
-          ${LINTER_COMMAND} "${FILE}" 2>&1
+          cd "${WORKSPACE_PATH}" || exit
+          ANSIBLE_ROLES_PATH=${ANSIBLE_ROLES_PATH} ${LINTER_COMMAND} "${FILE}" 2>&1
         )
       ####################################
       # Corner case for pwsh subshell    #
@@ -393,6 +389,6 @@ function LintCodebase() {
     # We failed to find files and no tests were ran #
     #################################################
     error "Failed to find any tests ran for the Linter:[${LINTER_NAME}]!"
-    fatal "Please validate logic or that tests exist!"
+    fatal "Validate logic and that tests exist for linter: ${LINTER_NAME}"
   fi
 }

lib/linter.sh

@@ -847,6 +847,11 @@ export DEFAULT_TEST_CASE_ANSIBLE_DIRECTORY
 ############################
 GetValidationInfo
 
+# Now ANSIBLE_DIRECTORY is set
+ANSIBLE_ROLES_PATH="${ANSIBLE_ROLES_PATH:-"${ANSIBLE_DIRECTORY}/roles"}"
+debug "Setting ANSIBLE_ROLES_PATH to: ${ANSIBLE_ROLES_PATH}..."
+export ANSIBLE_ROLES_PATH
+
 #################################
 # Get the linter rules location #
 #################################
@@ -868,7 +873,7 @@ GetStandardRules "typescript"
 # Define linter commands #
 ##########################
 declare -A LINTER_COMMANDS_ARRAY
-LINTER_COMMANDS_ARRAY['ANSIBLE']="ansible-lint -v -c ${ANSIBLE_LINTER_RULES}"
+LINTER_COMMANDS_ARRAY['ANSIBLE']="ansible-lint -vv -c ${ANSIBLE_LINTER_RULES}"
 LINTER_COMMANDS_ARRAY['ARM']="Import-Module ${ARM_TTK_PSD1} ; \${config} = \$(Import-PowerShellDataFile -Path ${ARM_LINTER_RULES}) ; Test-AzTemplate @config -TemplatePath"
 LINTER_COMMANDS_ARRAY['BASH']="shellcheck --color --external-sources"
 LINTER_COMMANDS_ARRAY['BASH_EXEC']="bash-exec"