Merge branch 'master' into FixVSCodeDebug

.automation/cleanup-docker.sh

@@ -8,7 +8,7 @@
 # Its based on being built from a GitHub Action, but could be easily updated
 # To be ran in a different medium.
 #
-# PRE-Reqs:
+# PRE-Requirements:
 # - Dockerfile
 # - System with Docker installed
 # - Global variables met

.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh

@@ -35,7 +35,7 @@ CheckGHEPid()
     ################################################
     if [ ! -f "$GHE_CONFIG_PID" ]; then
       # File not found
-      echo "Were good to move forward, no .pid file found at:[$GHE_CONFIG_PID]"
+      echo "We're good to move forward, no .pid file found at:[$GHE_CONFIG_PID]"
     else
       # Found the pid running, need to sleep
       echo "Current PID found, sleeping $SLEEP_SECONDS seconds before next check..."
@@ -189,10 +189,10 @@ CheckGHEProcess
 ####################
 RunConfigApply
 
-##########################################
+###########################################
-# Were going to run it again after a nap #
+# We're going to run it again after a nap #
 # to make sure there is no crazy actions  #
-##########################################
+###########################################
 sleep 300s
 
 ######################

.automation/test/clojure/README.md

@@ -0,0 +1,13 @@
+# Clojure Test Cases
+This folder holds the test cases for **Clojure**.  
+
+## Additional Docs
+No Additional information is needed for this test case.
+
+## Good Test Cases
+The test cases denoted: `LANGUAGE_good_FILE.EXTENSION` are all valid, and should pass successfully when linted.
+- **Note:** They are linted utilizing the default linter rules.
+
+## Bad Test Cases
+The test cases denoted: `LANGUAGE_bad_FILE.EXTENSION` are **NOT** valid, and should trigger errors when linted.
+- **Note:** They are linted utilizing the default linter rules.

.automation/test/clojure/clojure_bad_1.clj

@@ -0,0 +1,64 @@
+(ns foo
+  (:require
+   [clojure.string :as str]
+    ;; We're never using this namespace. Also, the namespaces aren't sorted.
+   [clojure.set :as set]))
+
+;; Here we made a typo, so the symbol is unresolved:
+(but-last [1 2 3])
+
+;; Clj-kondo knows about arities of clojure namespaces, but you can also teach
+;; it about your libraries or own namespaces
+(str/join)
+
+;; foo has an arity of 2, but we're not actually using y
+(defn foo-fn [x y]
+  ;; this do is redundant:
+  (do
+    ;; this is handy for debugging, but please remove it before pushing your code:
+    (def tmp_x x)
+    (let [y (fn [] (inc x))]
+      ;; the next let can be squashed together with the previous:
+      (let [z y]
+        ;; whoopsy, calling a local function with an incorrect number of args:
+        (y x)
+        ;; also wrong:
+        (recur)))))
+
+(letfn
+ [(f [] (h 1))
+  (h [] (f 1))])
+
+(defn- private-fn [])
+;; redefining it...
+(defn- private-fn [])
+
+(defn foo [] :foo)
+;; Type error, because foo doesn't return a number!
+(inc (foo))
+
+;; I'm tired now, let's sleep...
+;; Oops, not happening because of wrong amount of args:
+(Thread/sleep 1000 1 2)
+
+;; Here we switch to another namespace and require the previous:
+(ns bar (:require [foo :as f]))
+
+;; Wrong arity when calling a function from the previous namespace:
+(f/foo-fn)
+
+;; private:
+(f/private-fn)
+
+;; this won't pass the reader:
+{:a 1 :a 2}
+;; and neither will this:
+#{1 1}
+;; nor this:
+{:a 1 :b}
+
+(ns bar-test (:require [clojure.test :as t]))
+
+(t/deftest my-tests
+  ;; you're not actually testing something here:
+  (odd? (inc 1)))

.automation/test/clojure/clojure_good_1.clj

@@ -0,0 +1,34 @@
+(ns foo
+  (:require
+   [clojure.string :as str]))
+
+(butlast [1 2 3])
+
+(str/join "" "")
+
+(defn foo-fn [x]
+    (let [y (fn [] (inc x))]
+        (y)))
+
+(letfn
+ [(f [g] (h g))
+  (h [i] (f i))])
+
+(defn foo [] 1)
+(inc (foo))
+
+(Thread/sleep 1000 1)
+
+;; Here we switch to another namespace and require the previous:
+(ns bar (:require [foo :as f]))
+
+(f/foo-fn 1)
+
+{:a 1 :b 2}
+#{1 2}
+{:a 1 :b 2}
+
+(ns bar-test (:require [clojure.test :as t]))
+
+(t/deftest my-tests
+  (t/is (odd? (inc 1))))

.automation/test/coffeescript/coffeescript_bad_1.coffee

@@ -6,7 +6,7 @@
 #   `mona echo *` - repeats what you say
 #
 # Author:
-#   admiralAwkbar@github.com
+#   admiralawkbar@github.com
 
 ###############################
 # Drop Hammer array of images #

.automation/test/coffeescript/coffeescript_good_1.coffee

@@ -6,7 +6,7 @@
 #   `mona echo *` - repeats what you say
 #
 # Author:
-#   admiralAwkbar@github.com
+#   admiralawkbar@github.com
 
 ###############################
 # Drop Hammer array of images #

.automation/test/css/css_bad_01.css

@@ -1,5 +1,5 @@
 /* Bad */
-/* Multiline */
+/* Multi-line */
 /* Comment */
 .selector-3[type="text"] {
     background: linear-gradient(#FFFFFF, rgba(0, 0, 0, 0.8));

.automation/test/markdown/markdown_bad_1.md

@@ -16,5 +16,5 @@ ls -la
 
 # Walk away
 
-Were all done **here**.
+We're all done **here**.
 - [Link Action]https://github.com

.automation/test/markdown/markdown_good_1.md

@@ -16,5 +16,5 @@ ls -la
 
 ### Walk away
 
-Were all done **here**.
+We're all done **here**.
 - [Link Action](https://github.com)

.automation/test/openapi/README.md

@@ -0,0 +1,14 @@
+# OpenAPI Test Cases
+This folder holds the test cases for **OpenAPI**.  
+
+## Additional Docs
+The `_bad_` tests are valid `.yml`/`.json` but invalid OpenAPI specs.
+The test extensions used are `.ymlopenapi`/`.jsonopenapi` instead of `.yml`/`.json`. This is to prevent the [YAML] and [JSON] tests from picking them up.
+
+## Good Test Cases
+The test cases denoted: `LANGUAGE_good_FILE.EXTENSION` are all valid, and should pass successfully when linted.
+- **Note:** They are linted utilizing the default linter rules.
+
+## Bad Test Cases
+The test cases denoted: `LANGUAGE_bad_FILE.EXTENSION` are **NOT** valid, and should trigger errors when linted.
+- **Note:** They are linted utilizing the default linter rules.

.automation/test/openapi/openapi_bad_1.ymlopenapi

@@ -0,0 +1 @@
+openapi: '3.0.0'

.automation/test/openapi/openapi_bad_2.jsonopenapi

@@ -0,0 +1,3 @@
+{
+  "openapi": "3.0.0"
+}

.automation/test/openapi/openapi_good_1.ymlopenapi

@@ -0,0 +1,13 @@
+openapi: 3.0.0
+info:
+  title: Example
+  version: '1.0'
+  contact:
+    name: Justin Kalland
+    email: justin@kalland.com
+  description: Test for super-linter
+servers:
+  - url: 'http://localhost:3000'
+paths: {}
+tags:
+  - name: example

.automation/test/openapi/openapi_good_2.jsonopenapi

@@ -0,0 +1,23 @@
+{
+  "openapi": "3.0.0",
+  "info": {
+    "title": "Example",
+    "version": "1.0",
+    "contact": {
+      "name": "Justin Kalland",
+      "email": "justin@kalland.com"
+    },
+    "description": "Test for super-linter"
+  },
+  "servers": [
+    {
+      "url": "http://localhost:3000"
+    }
+  ],
+  "paths": {},
+  "tags": [
+    {
+      "name": "example"
+    }
+  ]
+}

.automation/test/perl/perl_bad_1.pl

@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 ################################################################################
 ################################################################################
-######### Script action @admiralAwkbar #########################################
+######### Script action @admiralawkbar #########################################
 ################################################################################
 
 #############

.automation/test/perl/perl_good_1.pl

@@ -1,7 +1,7 @@
 #!/usr/bin/perl
 ################################################################################
 ################################################################################
-######### Script action @admiralAwkbar #########################################
+######### Script action @admiralawkbar #########################################
 ################################################################################
 
 #############

.automation/upload-docker.sh

@@ -9,7 +9,7 @@
 # Its based on being built from a GitHub Action, but could be easily updated
 # To be ran in a different medium.
 #
-# PRE-Reqs:
+# PRE-Requirements:
 # - Dockerfile
 # - System with Docker installed
 # - Global variables met

.github/CONTRIBUTING.md

@@ -33,9 +33,10 @@ Draft pull requests are also welcome to get feedback early on, or if there is so
 If you are the current maintainer of this action:
 1. Update `README.md` and the wiki to reflect new version number in the example workflow file sections
 2. Draft [Release](https://help.github.com/en/github/administering-a-repository/managing-releases-in-a-repository) with a summarized changelog
-3. A GitHub Action will Publish the Docker image to GitHub Package Registry once a Release is created
+3. Ensure you check the box for [publishing to the marketplace](https://help.github.com/en/actions/creating-actions/publishing-actions-in-github-marketplace#publishing-an-action)
-4. A GitHub Action will Publish the Docker image to Docker Hub once a Release is created
+4. A GitHub Action will Publish the Docker image to GitHub Package Registry once a Release is created
-5. Look for approval from [CODEOWNERS](https://help.github.com/en/github/creating-cloning-and-archiving-repositories/about-code-owners)
+5. A GitHub Action will Publish the Docker image to Docker Hub once a Release is created
+6. Look for approval from [CODEOWNERS](https://help.github.com/en/github/creating-cloning-and-archiving-repositories/about-code-owners)
 
 ## Resources
 - [How to Contribute to Open Source](https://opensource.guide/how-to-contribute/)

.github/linters/.clj-kondo/config.edn

@@ -0,0 +1,2 @@
+{:linters {:unresolved-symbol {:exclude [(compojure.api.sweet/defroutes)]}
+           :refer-all         {:exclude [clj-time.jdbc]}}}

.github/linters/.openapirc.yml

@@ -0,0 +1,9 @@
+---
+
+##########################
+##########################
+## OpenAPI Linter rules ##
+##########################
+##########################
+
+extends: spectral:oas

.github/linters/.python-lint

@@ -1,4 +1,5 @@
 [MASTER]
+errors-only=
 
 # A comma-separated list of package or module names from where C extensions may
 # be loaded. Extensions are loading into the active Python interpreter and may
@@ -157,7 +158,7 @@ output-format=text
 reports=no
 
 # Activate the evaluation score.
-score=yes
+score=no
 
 
 [REFACTORING]

.gitignore

@@ -29,7 +29,7 @@ bower_components
 # node-waf configuration
 .lock-wscript
 
-# Compiled binary addons (https://nodejs.org/api/addons.html)
+# Compiled binary add-ons (https://nodejs.org/api/addons.html)
 build/Release
 
 # Dependency directories
@@ -59,3 +59,6 @@ typings/
 
 # next.js build output
 .next
+
+# clj-kondo cache
+.cache

Dockerfile

@@ -72,6 +72,7 @@ RUN npm config set package-lock false \
       eslint-plugin-jest \
       stylelint \
       stylelint-config-standard \
+      @stoplight/spectral \
       && npm --no-cache install \
       markdownlint-cli \
       jsonlint prettyjson \
@@ -131,6 +132,15 @@ RUN curl -Ls "$(curl -Ls https://api.github.com/repos/terraform-linters/tflint/r
 RUN wget "https://github.com/dotenv-linter/dotenv-linter/releases/latest/download/dotenv-linter-alpine-x86_64.tar.gz" -O - -q | tar -xzf - \
     && mv "dotenv-linter" /usr/bin
 
+#####################
+# Install clj-kondo #
+#####################
+ARG CLJ_KONDO_VERSION='2020.06.12'
+RUN curl -sLO https://github.com/borkdude/clj-kondo/releases/download/v${CLJ_KONDO_VERSION}/clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && unzip clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && rm clj-kondo-${CLJ_KONDO_VERSION}-linux-static-amd64.zip \
+    && mv clj-kondo /usr/bin/
+
 ##################
 # Install ktlint #
 ##################
@@ -166,8 +176,10 @@ ENV GITHUB_SHA=${GITHUB_SHA} \
     VALIDATE_TERRAFORM=${VALIDATE_TERRAFORM} \
     VALIDATE_CSS=${VALIDATE_CSS} \
     VALIDATE_ENV=${VALIDATE_ENV} \
+    VALIDATE_CLOJURE=${VALIDATE_CLOJURE} \
     VALIDATE_KOTLIN=${VALIDATE_KOTLIN} \
     VALIDATE_POWERSHELL=${VALIDATE_POWERSHELL} \
+    VALIDATE_OPENAPI=${VALIDATE_OPENAPI} \
     ANSIBLE_DIRECTORY=${ANSIBLE_DIRECTORY} \
     RUN_LOCAL=${RUN_LOCAL} \
     TEST_CASE_RUN=${TEST_CASE_RUN} \

README.md

@@ -8,6 +8,20 @@ The end goal of this tool:
 - Build guidelines for code layout and format
 - Automate the process to help streamline code reviews
 
+
+## Table of Contents
+
+- [How it works](#how-it-works)
+- [Supported linters](#supported-linters)
+- [Usage](#how-to-use)
+- [Environment variables](#environment-variables)
+- [Disable rules](#disabling-rules)
+- [Docker Hub](#docker-hub)
+- [Run Super-Linter locally](#running-super-linter-locally-troubleshootingdebuggingenhancements)
+  - [CI / CT/ CD](#cictcd)
+- [Limitations](#limitations)
+- [Contributing](#how-to-contribute)
+
 ## How it Works
 
 The super-linter finds issues and reports them to the console output. Fixes are suggested in the console output but not automatically fixed, and a status check will show up as failed on the pull request.
@@ -22,6 +36,7 @@ Developers on **GitHub** can call the **GitHub Action** to lint their code base
 | ---              | ---                                                                      |
 | **Ansible**      | [ansible-lint](https://github.com/ansible/ansible-lint)                  |
 | **CSS**          | [stylelint](https://stylelint.io/)                                       |
+| **Clojure**      | [clj-kondo](https://github.com/borkdude/clj-kondo)                       |
 | **CoffeeScript** | [coffeelint](https://coffeelint.github.io/)                              |
 | **Dockerfile**   | [dockerfilelint](https://github.com/replicatedhq/dockerfilelint.git)     |
 | **Golang**       | [golangci-lint](https://github.com/golangci/golangci-lint)               |
@@ -40,6 +55,7 @@ Developers on **GitHub** can call the **GitHub Action** to lint their code base
 | **PowerShell**   | [PSScriptAnalyzer](https://github.com/PowerShell/Psscriptanalyzer)       |
 | **ENV**          | [dotenv-linter](https://github.com/dotenv-linter/dotenv-linter)          |
 | **Kotlin**       | [ktlint](https://github.com/pinterest/ktlint)                            |
+| **OpenAPI**      | [spectral](https://github.com/stoplightio/spectral)                      |
 
 ## How to use
 To use this **GitHub** Action you will need to complete the following:
@@ -133,11 +149,14 @@ and won't run anything unexpected.
 | **VALIDATE_PHP** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_PYTHON** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_RUBY** | `true` | Flag to enable or disable the linting process of the language. |
+| **RUBY_CONFIG_FILE** | `.ruby-lint.yml` | Filename for [rubocop configuration](https://docs.rubocop.org/rubocop/configuration.html) (ex: `.ruby-lint.yml`, `.rubocop.yml`)|
 | **VALIDATE_COFFEE** | `true` | Flag to enable or disable the linting process of the language . |
 | **VALIDATE_ANSIBLE** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_JAVASCRIPT_ES** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: eslint) |
+| **JAVASCRIPT_ES_CONFIG_FILE** | `.eslintrc.yml` | Filename for [eslint configuration](https://eslint.org/docs/user-guide/configuring#configuration-file-formats) (ex: `.eslintrc.yml`, `.eslintrc.json`)|
 | **VALIDATE_JAVASCRIPT_STANDARD** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: standard) |
 | **VALIDATE_TYPESCRIPT_ES** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: eslint) |
+| **TYPESCRIPT_ES_CONFIG_FILE** | `.eslintrc.yml` | Filename for [eslint configuration](https://eslint.org/docs/user-guide/configuring#configuration-file-formats) (ex: `.eslintrc.yml`, `.eslintrc.json`)|
 | **VALIDATE_TYPESCRIPT_STANDARD** | `true` | Flag to enable or disable the linting process of the language. (Utilizing: standard) |
 | **VALIDATE_DOCKER** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_GO** | `true` | Flag to enable or disable the linting process of the language. |
@@ -145,7 +164,9 @@ and won't run anything unexpected.
 | **VALIDATE_TERRAFORM** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_CSS** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_ENV** | `true` | Flag to enable or disable the linting process of the language. |
+| **VALIDATE_CLOJURE** | `true` | Flag to enable or disable the linting process of the language. |
 | **VALIDATE_KOTLIN** | `true` | Flag to enable or disable the linting process of the language. |
+| **VALIDATE_OPENAPI** | `true` | Flag to enable or disable the linting process of the language. |
 | **ANSIBLE_DIRECTORY** | `/ansible` | Flag to set the root directory for Ansible file location(s). |
 | **ACTIONS_RUNNER_DEBUG** | `false` | Flag to enable additional information about the linter, versions, and additional output. |
 | **DISABLE_ERRORS** | `false` | Flag to have the linter complete with exit code 0 even if errors were detected. |

TEMPLATES/.clj-kondo/config.edn

@@ -0,0 +1,2 @@
+{:linters {:unresolved-symbol {:exclude [(compojure.api.sweet/defroutes)]}
+           :refer-all         {:exclude [clj-time.jdbc]}}}

TEMPLATES/.openapirc.yml

@@ -0,0 +1,9 @@
+---
+
+##########################
+##########################
+## OpenAPI Linter rules ##
+##########################
+##########################
+
+extends: spectral:oas

TEMPLATES/.python-lint

@@ -1,4 +1,5 @@
 [MASTER]
+errors-only=
 
 # A comma-separated list of package or module names from where C extensions may
 # be loaded. Extensions are loading into the active Python interpreter and may
@@ -157,7 +158,7 @@ output-format=text
 reports=no
 
 # Activate the evaluation score.
-score=yes
+score=no
 
 
 [REFACTORING]

docs/disabling-linters.md

@@ -24,6 +24,7 @@ Below are examples and documentation for each language and the various methods t
 - [CSS](#stylelint)
 - [ENV](#dotenv-linter)
 - [Kotlin](#kotlin)
+- [OpenAPI](#openapi)
 
 <!-- toc -->
 
@@ -156,9 +157,9 @@ This line is waaaaaaaaaay too long  # yamllint disable-line
 ### Yamllint disable code block
 ```yml
 # yamllint disable rule:colons
-- Lorem       : ipsum
+- Key         : value
-  dolor       : sit amet,
+  dolor       : sit,
-  consectetur : adipiscing elit
+  foo         : bar
 # yamllint enable
 ```
 
@@ -222,9 +223,9 @@ class Foo(object):
     def meth3(self):
         """test one line disabling"""
         # no error
-        print(self.bla) # pylint: disable=no-member
+        print(self.baz) # pylint: disable=no-member
         # error
-        print(self.blop)
+        print(self.baz)
 ```
 
 ### Pylint disable entire file
@@ -607,3 +608,44 @@ import package.b.*
 
 ### ktlint disable entire file
 - There is currently **No** way to disable rules inline of the file(s)
+
+--------------------------------------------------------------------------------
+
+## OpenAPI
+- [spectral](https://github.com/stoplightio/spectral)
+
+### OpenAPI Config file
+- `.github/linters/.openapirc.yml`
+- You can add, extend, and disable rules
+- Documentation at [Spectral Custom Rulesets](https://stoplight.io/p/docs/gh/stoplightio/spectral/docs/guides/4-custom-rulesets.md)
+- File should be located at: `.github/linters/.openapirc.yml`
+
+### OpenAPI disable single line
+- There is currently **No** way to disable rules inline of the file(s)
+
+### OpenAPI disable code block
+- There is currently **No** way to disable rules inline of the file(s)
+
+### OpenAPI disable entire file
+- There is currently **No** way to disable rules inline of the file(s)
+- However, you can make [rule exceptions](https://stoplight.io/p/docs/gh/stoplightio/spectral/docs/guides/6-exceptions.md?srn=gh/stoplightio/spectral/docs/guides/6-exceptions.md) in the config for individual file(s).
+
+--------------------------------------------------------------------------------
+
+## Clojure
+- [clj-kondo](https://github.com/borkdude/clj-kondo)
+- Since clj-kondo approaches static analysis in a very Clojure way, it is advised to read the [configuration docs](https://github.com/borkdude/clj-kondo/blob/master/doc/config.md)
+
+### clj-kondo standard Config file
+- `.github/linters/.clj-kondo/config.edn`
+
+### clj-kondo disable single line
+- There is currently **No** way to disable rules in a single line
+
+### clj-kondo disable code block
+- There is currently **No** way to disable rules in a code block
+
+### clj-kondo disable entire file
+```clojure
+{:output {:exclude-files ["path/to/file"]}}
+```

lib/linter.sh

@@ -3,7 +3,7 @@
 
 ################################################################################
 ################################################################################
-########### Super-Linter (Lint all the code) @AdmiralAwkbar ####################
+########### Super-Linter (Lint all the code) @admiralawkbar ####################
 ################################################################################
 ################################################################################
 
@@ -23,17 +23,17 @@ MD_LINTER_RULES="$DEFAULT_RULES_LOCATION/$MD_FILE_NAME"             # Path to th
 PYTHON_FILE_NAME='.python-lint'                                     # Name of the file
 PYTHON_LINTER_RULES="$DEFAULT_RULES_LOCATION/$PYTHON_FILE_NAME"     # Path to the python lint rules
 # Ruby Vars
-RUBY_FILE_NAME='.ruby-lint.yml'                                     # Name of the file
+RUBY_FILE_NAME="${RUBY_CONFIG_FILE:-.ruby-lint.yml}"                # Name of the file
 RUBY_LINTER_RULES="$DEFAULT_RULES_LOCATION/$RUBY_FILE_NAME"         # Path to the ruby lint rules
 # Coffee Vars
 COFFEE_FILE_NAME='.coffee-lint.json'                                  # Name of the file
-COFFEESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$COFFEE_FILE_NAME" # Path to the coffescript lint rules
+COFFEESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$COFFEE_FILE_NAME" # Path to the coffeescript lint rules
 # Javascript Vars
-JAVASCRIPT_FILE_NAME='.eslintrc.yml'                                    # Name of the file
+JAVASCRIPT_FILE_NAME="${JAVASCRIPT_ES_CONFIG_FILE:-.eslintrc.yml}"      # Name of the file
 JAVASCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$JAVASCRIPT_FILE_NAME" # Path to the Javascript lint rules
 JAVASCRIPT_STANDARD_LINTER_RULES=''                                     # ENV string to pass when running js standard
 # Typescript Vars
-TYPESCRIPT_FILE_NAME='.eslintrc.yml'                                    # Name of the file
+TYPESCRIPT_FILE_NAME="${TYPESCRIPT_ES_CONFIG_FILE:-.eslintrc.yml}"      # Name of the file
 TYPESCRIPT_LINTER_RULES="$DEFAULT_RULES_LOCATION/$TYPESCRIPT_FILE_NAME" # Path to the Typescript lint rules
 TYPESCRIPT_STANDARD_LINTER_RULES=''                                     # ENV string to pass when running js standard
 # Ansible Vars
@@ -54,6 +54,12 @@ POWERSHELL_LINTER_RULES="$DEFAULT_RULES_LOCATION/$POWERSHELL_FILE_NAME"    # Pat
 # CSS Vars
 CSS_FILE_NAME='.stylelintrc.json'                                   # Name of the file
 CSS_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CSS_FILE_NAME"           # Path to the CSS lint rules
+# OpenAPI Vars
+OPENAPI_FILE_NAME='.openapirc.yml'                                   # Name of the file
+OPENAPI_LINTER_RULES="$DEFAULT_RULES_LOCATION/$OPENAPI_FILE_NAME"   # Path to the OpenAPI lint rules
+# Clojure Vars
+CLOJURE_FILE_NAME='.clj-kondo/config.edn'
+CLOJURE_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CLOJURE_FILE_NAME"
 
 #######################################
 # Linter array for information prints #
@@ -61,7 +67,7 @@ CSS_LINTER_RULES="$DEFAULT_RULES_LOCATION/$CSS_FILE_NAME"           # Path to th
 LINTER_ARRAY=("jsonlint" "yamllint" "xmllint" "markdownlint" "shellcheck"
   "pylint" "perl" "rubocop" "coffeelint" "eslint" "standard"
   "ansible-lint" "/dockerfilelint/bin/dockerfilelint" "golangci-lint" "tflint"
-  "stylelint" "dotenv-linter" "powershell" "ktlint")
+  "stylelint" "dotenv-linter" "powershell" "ktlint" "clj-kondo" "spectral")
 
 #############################
 # Language array for prints #
@@ -69,7 +75,7 @@ LINTER_ARRAY=("jsonlint" "yamllint" "xmllint" "markdownlint" "shellcheck"
 LANGUAGE_ARRAY=('YML' 'JSON' 'XML' 'MARKDOWN' 'BASH' 'PERL' 'PHP' 'RUBY' 'PYTHON'
   'COFFEESCRIPT' 'ANSIBLE' 'JAVASCRIPT_STANDARD' 'JAVASCRIPT_ES'
   'TYPESCRIPT_STANDARD' 'TYPESCRIPT_ES' 'DOCKER' 'GO' 'TERRAFORM'
-  'ENV' 'POWERSHELL' 'KOTLIN')
+  'CSS' 'ENV' 'POWERSHELL' 'KOTLIN' 'CLOJURE' 'OPENAPI')
 
 ###################
 # GitHub ENV Vars #
@@ -99,9 +105,11 @@ VALIDATE_DOCKER="${VALIDATE_DOCKER}"                  # Boolean to validate lang
 VALIDATE_GO="${VALIDATE_GO}"                          # Boolean to validate language
 VALIDATE_CSS="${VALIDATE_CSS}"                        # Boolean to validate language
 VALIDATE_ENV="${VALIDATE_ENV}"                        # Boolean to validate language
+VALIDATE_CLOJURE="${VALIDATE_CLOJURE}"                # Boolean to validate language
 VALIDATE_TERRAFORM="${VALIDATE_TERRAFORM}"            # Boolean to validate language
 VALIDATE_POWERSHELL="${VALIDATE_POWERSHELL}"          # Boolean to validate language
 VALIDATE_KOTLIN="${VALIDATE_KOTLIN}"                  # Boolean to validate language
+VALIDATE_OPENAPI="${VALIDATE_OPENAPI}"                # Boolean to validate language
 TEST_CASE_RUN="${TEST_CASE_RUN}"                      # Boolean to validate only test cases
 DISABLE_ERRORS="${DISABLE_ERRORS}"                    # Boolean to enable warning-only output without throwing errors
 
@@ -124,6 +132,7 @@ RAW_FILE_ARRAY=()                     # Array of all files that were changed
 READ_ONLY_CHANGE_FLAG=0               # Flag set to 1 if files changed are not txt or md
 TEST_CASE_FOLDER='.automation/test'   # Folder for test cases we should always ignore
 DEFAULT_DISABLE_ERRORS='false'        # Default to enabling errors
+DEFAULT_IFS="$IFS"                    # Get the Default IFS for updating
 
 ##########################
 # Array of changed files #
@@ -148,7 +157,9 @@ FILE_ARRAY_TERRAFORM=()             # Array of files to check
 FILE_ARRAY_POWERSHELL=()            # Array of files to check
 FILE_ARRAY_CSS=()                   # Array of files to check
 FILE_ARRAY_ENV=()                   # Array of files to check
+FILE_ARRAY_CLOJURE=()               # Array of files to check
 FILE_ARRAY_KOTLIN=()                # Array of files to check
+FILE_ARRAY_OPENAPI=()               # Array of files to check
 
 ############
 # Counters #
@@ -174,7 +185,9 @@ ERRORS_FOUND_TERRAFORM=0            # Count of errors found
 ERRORS_FOUND_POWERSHELL=0           # Count of errors found
 ERRORS_FOUND_CSS=0                  # Count of errors found
 ERRORS_FOUND_ENV=0                  # Count of errors found
+ERRORS_FOUND_CLOJURE=0              # Count of errors found
 ERRORS_FOUND_KOTLIN=0               # Count of errors found
+ERRORS_FOUND_OPENAPI=0              # Count of errors found
 
 ################################################################################
 ########################## FUNCTIONS BELOW #####################################
@@ -556,6 +569,42 @@ LintAnsibleFiles()
     fi
   fi
 }
+
+################################################################################
+#### Function DetectOpenAPIFile ################################################
+DetectOpenAPIFile()
+{
+  ################
+  # Pull in vars #
+  ################
+  FILE="$1"
+
+  ###############################
+  # Check the file for keywords #
+  ###############################
+  grep -E '"openapi":|"swagger":|^openapi:|^swagger:' "$GITHUB_WORKSPACE/$FILE" > /dev/null
+
+  #######################
+  # Load the error code #
+  #######################
+  ERROR_CODE=$?
+
+  ##############################
+  # Check the shell for errors #
+  ##############################
+  if [ $ERROR_CODE -eq 0 ]; then
+    ########################
+    # Found string in file #
+    ########################
+	  return 0
+  else
+    ###################
+    # No string match #
+    ###################
+	  return 1
+  fi
+}
+
 ################################################################################
 #### Function GetGitHubVars ####################################################
 GetGitHubVars()
@@ -759,7 +808,9 @@ GetValidationInfo()
   VALIDATE_POWERSHELL=$(echo "$VALIDATE_POWERSHELL" | awk '{print tolower($0)}')
   VALIDATE_CSS=$(echo "$VALIDATE_CSS" | awk '{print tolower($0)}')
   VALIDATE_ENV=$(echo "$VALIDATE_ENV" | awk '{print tolower($0)}')
+  VALIDATE_CLOJURE=$(echo "$VALIDATE_CLOJURE" | awk '{print tolower($0)')
   VALIDATE_KOTLIN=$(echo "$VALIDATE_KOTLIN" | awk '{print tolower($0)}')
+  VALIDATE_OPENAPI=$(echo "$VALIDATE_OPENAPI" | awk '{print tolower($0)}')
 
   ################################################
   # Determine if any linters were explicitly set #
@@ -786,6 +837,8 @@ GetValidationInfo()
         -n "$VALIDATE_POWERSHELL" || \
         -n "$VALIDATE_CSS" || \
         -n "$VALIDATE_ENV" || \
+        -n "$VALIDATE_CLOJURE" || \
+        -n "$VALIDATE_OPENAPI" || \
         -n "$VALIDATE_KOTLIN" ]]; then
     ANY_SET="true"
   fi
@@ -1098,6 +1151,33 @@ GetValidationInfo()
     VALIDATE_KOTLIN="true"
   fi
 
+  #######################################
+  # Validate if we should check OPENAPI #
+  #######################################
+  if [[ "$ANY_SET" == "true" ]]; then
+    # Some linter flags were set - only run those set to true
+    if [[ -z "$VALIDATE_OPENAPI" ]]; then
+      # OPENAPI flag was not set - default to false
+      VALIDATE_OPENAPI="false"
+    fi
+  else
+    # No linter flags were set - default all to true
+    VALIDATE_OPENAPI="true"
+  fi
+
+  #######################################
+  # Validate if we should check Clojure #
+  #######################################
+  if [[ "$ANY_SET" == "true" ]]; then
+    # Some linter flags were set - only run those set to true
+    if [[ -z "$VALIDATE_CLOJURE" ]]; then
+      # Clojure flag was not set - default to false
+      VALIDATE_CLOJURE="false"
+    fi
+  else
+    # No linter flags were set - default all to true
+    VALIDATE_CLOJURE="true"
+  fi
 
   #######################################
   # Print which linters we are enabling #
@@ -1202,6 +1282,11 @@ GetValidationInfo()
   else
     PRINT_ARRAY+=("- Excluding [CSS] files in code base...")
   fi
+  if [[ "$VALIDATE_CLOJURE" == "true" ]]; then
+    PRINT_ARRAY+=("- Validating [CLOJURE] files in code base...")
+  else
+    PRINT_ARRAY+=("- Excluding [CLOJURE] files in code base...")
+  fi
   if [[ "$VALIDATE_ENV" == "true" ]]; then
     PRINT_ARRAY+=("- Validating [ENV] files in code base...")
   else
@@ -1212,6 +1297,11 @@ GetValidationInfo()
   else
     PRINT_ARRAY+=("- Excluding [KOTLIN] files in code base...")
   fi
+  if [[ "$VALIDATE_OPENAPI" == "true" ]]; then
+    PRINT_ARRAY+=("- Validating [OPENAPI] files in code base...")
+  else
+    PRINT_ARRAY+=("- Excluding [OPENAPI] files in code base...")
+  fi
 
   ##############################
   # Validate Ansible Directory #
@@ -1395,6 +1485,12 @@ BuildFileList()
       # Append the file to the array #
       ################################
       FILE_ARRAY_YML+=("$FILE")
+      ############################
+      # Check if file is OpenAPI #
+      ############################
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
       ##########################################################
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
@@ -1407,6 +1503,12 @@ BuildFileList()
       # Append the file to the array #
       ################################
       FILE_ARRAY_JSON+=("$FILE")
+      ############################
+      # Check if file is OpenAPI #
+      ############################
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
       ##########################################################
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
@@ -1597,6 +1699,15 @@ BuildFileList()
       # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
       ##########################################################
       READ_ONLY_CHANGE_FLAG=1
+    elif [ "$FILE_TYPE" == "clj" ] || [ "$FILE_TYPE" == "cljs" ] || [ "$FILE_TYPE" == "cljc" ] || [ "$FILE_TYPE" == "edn" ]; then
+      ################################
+      # Append the file to the array #
+      ################################
+      FILE_ARRAY_CLOJURE+=("$FILE")
+      ##########################################################
+      # Set the READ_ONLY_CHANGE_FLAG since this could be exec #
+      ##########################################################
+      READ_ONLY_CHANGE_FLAG=1
     else
       ##############################################
       # Use file to see if we can parse what it is #
@@ -1750,12 +1861,22 @@ LintCodebase()
     # We have files added to array of files to check
     LIST_FILES=("${FILE_ARRAY[@]}") # Copy the array into list
   else
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
     #################################
     # Get list of all files to lint #
     #################################
     # shellcheck disable=SC2207,SC2086
     LIST_FILES=($(cd "$GITHUB_WORKSPACE" || exit; find . -type f -regex "$FILE_EXTENSIONS" 2>&1))
 
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
+
     ############################################################
     # Set it back to empty if loaded with blanks from scanning #
     ############################################################
@@ -1922,11 +2043,21 @@ TestCodebase()
     # shellcheck disable=SC2207,SC2086,SC2010
     LIST_FILES=($(cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit; ls ansible/ | grep ".yml" 2>&1))
   else
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
     #################################
     # Get list of all files to lint #
     #################################
     # shellcheck disable=SC2207,SC2086
     LIST_FILES=($(cd "$GITHUB_WORKSPACE/$TEST_CASE_FOLDER" || exit; find . -type f -regex "$FILE_EXTENSIONS" ! -path "*./ansible*" 2>&1))
+
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
   fi
 
   ##################
@@ -2126,6 +2257,8 @@ Footer()
      [ "$ERRORS_FOUND_RUBY" -ne 0 ] || \
      [ "$ERRORS_FOUND_CSS" -ne 0 ] || \
      [ "$ERRORS_FOUND_ENV" -ne 0 ] || \
+     [ "$ERRORS_FOUND_OPENAPI" -ne 0 ] || \
+     [ "$ERRORS_FOUND_CLOJURE" -ne 0 ] || \
      [ "$ERRORS_FOUND_KOTLIN" -ne 0 ]; then
     # Failed exit
     echo "Exiting with errors found!"
@@ -2171,7 +2304,7 @@ RunTestCases()
   TestCodebase "XML" "xmllint" "xmllint" ".*\.\(xml\)\$"
   TestCodebase "MARKDOWN" "markdownlint" "markdownlint -c $MD_LINTER_RULES" ".*\.\(md\)\$"
   TestCodebase "BASH" "shellcheck" "shellcheck" ".*\.\(sh\)\$"
-  TestCodebase "PYTHON" "pylint" "pylint --rcfile $PYTHON_LINTER_RULES -E" ".*\.\(py\)\$"
+  TestCodebase "PYTHON" "pylint" "pylint --rcfile $PYTHON_LINTER_RULES" ".*\.\(py\)\$"
   TestCodebase "PERL" "perl" "perl -Mstrict -cw" ".*\.\(pl\)\$"
   TestCodebase "PHP" "php" "php -l" ".*\.\(php\)\$"
   TestCodebase "RUBY" "rubocop" "rubocop -c $RUBY_LINTER_RULES" ".*\.\(rb\)\$"
@@ -2181,13 +2314,15 @@ RunTestCases()
   TestCodebase "JAVASCRIPT_STANDARD" "standard" "standard $JAVASCRIPT_STANDARD_LINTER_RULES" ".*\.\(js\)\$"
   TestCodebase "TYPESCRIPT_ES" "eslint" "eslint --no-eslintrc -c $TYPESCRIPT_LINTER_RULES" ".*\.\(ts\)\$"
   TestCodebase "TYPESCRIPT_STANDARD" "standard" "standard --parser @typescript-eslint/parser --plugin @typescript-eslint/eslint-plugin $TYPESCRIPT_STANDARD_LINTER_RULES" ".*\.\(ts\)\$"
-  TestCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint" ".*\(Dockerfile\)\$"
+  TestCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint -c $DOCKER_LINTER_RULES" ".*\(Dockerfile\)\$"
   TestCodebase "ANSIBLE" "ansible-lint" "ansible-lint -v -c $ANSIBLE_LINTER_RULES" "ansible-lint"
   TestCodebase "TERRAFORM" "tflint" "tflint -c $TERRAFORM_LINTER_RULES" ".*\.\(tf\)\$"
   TestCodebase "POWERSHELL" "pwsh" "pwsh -c Invoke-ScriptAnalyzer -EnableExit -Settings $POWERSHELL_LINTER_RULES -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$"
   TestCodebase "CSS" "stylelint" "stylelint --config $CSS_LINTER_RULES" ".*\.\(css\)\$"
   TestCodebase "ENV" "dotenv-linter" "dotenv-linter" ".*\.\(env\)\$"
+  TestCodebase "CLOJURE" "clj-kondo" "clj-kondo --config $CLOJURE_LINTER_RULES --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$"
   TestCodebase "KOTLIN" "ktlint" "ktlint" ".*\.\(kt\|kts\)\$"
+  TestCodebase "OPENAPI" "spectral" "spectral lint -r $OPENAPI_LINTER_RULES" ".*\.\(ymlopenapi\|jsonopenapi\)\$"
 
   #################
   # Footer prints #
@@ -2341,7 +2476,7 @@ if [ "$VALIDATE_PYTHON" == "true" ]; then
   # Lint the python files #
   #########################
   # LintCodebase "FILE_TYPE" "LINTER_NAME" "LINTER_CMD" "FILE_TYPES_REGEX" "FILE_ARRAY"
-  LintCodebase "PYTHON" "pylint" "pylint --rcfile $PYTHON_LINTER_RULES -E" ".*\.\(py\)\$" "${FILE_ARRAY_PYTHON[@]}"
+  LintCodebase "PYTHON" "pylint" "pylint --rcfile $PYTHON_LINTER_RULES" ".*\.\(py\)\$" "${FILE_ARRAY_PYTHON[@]}"
 fi
 
 ################
@@ -2516,7 +2651,21 @@ if [ "$VALIDATE_DOCKER" == "true" ]; then
   # Lint the docker files #
   #########################
   # LintCodebase "FILE_TYPE" "LINTER_NAME" "LINTER_CMD" "FILE_TYPES_REGEX" "FILE_ARRAY"
-  LintCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint" ".*\(Dockerfile\)\$" "${FILE_ARRAY_DOCKER[@]}"
+  LintCodebase "DOCKER" "/dockerfilelint/bin/dockerfilelint" "/dockerfilelint/bin/dockerfilelint -c $DOCKER_LINTER_RULES" ".*\(Dockerfile\)\$" "${FILE_ARRAY_DOCKER[@]}"
+fi
+
+###################
+# CLOJURE LINTING #
+###################
+if [ "$VALIDATE_CLOJURE" == "true" ]; then
+  #################################
+  # Get Clojure standard rules #
+  #################################
+  GetStandardRules "clj-kondo"
+  #########################
+  # Lint the Clojure files #
+  #########################
+  LintCodebase "CLOJURE" "clj-kondo" "clj-kondo --config $CLOJURE_LINTER_RULES --lint" ".*\.\(clj\|cljs\|cljc\|edn\)\$" "${FILE_ARRAY_CLOJURE[@]}"
 fi
 
 ######################
@@ -2530,6 +2679,39 @@ if [ "$VALIDATE_POWERSHELL" == "true" ]; then
   LintCodebase "POWERSHELL" "pwsh" "pwsh -c Invoke-ScriptAnalyzer -EnableExit -Settings $POWERSHELL_LINTER_RULES -Path" ".*\.\(ps1\|psm1\|psd1\|ps1xml\|pssc\|psrc\|cdxml\)\$" "${FILE_ARRAY_POWERSHELL[@]}"
 fi
 
+###################
+# OPENAPI LINTING #
+###################
+if [ "$VALIDATE_OPENAPI" == "true" ]; then
+  # If we are validating all codebase we need to build file list because not every yml/json file is an OpenAPI file
+  if [ "$VALIDATE_ALL_CODEBASE" == "true" ]; then
+    ###############################################################################
+    # Set the file seperator to newline to allow for grabbing objects with spaces #
+    ###############################################################################
+    IFS=$'\n'
+
+    # shellcheck disable=SC2207
+    LIST_FILES=($(cd "$GITHUB_WORKSPACE" || exit; find . -type f -regex ".*\.\(yml\|yaml\|json\)\$" 2>&1))
+    for FILE in "${LIST_FILES[@]}"
+    do
+      if DetectOpenAPIFile "$FILE"; then
+        FILE_ARRAY_OPENAPI+=("$FILE")
+      fi
+    done
+
+    ###########################
+    # Set IFS back to default #
+    ###########################
+    IFS="$DEFAULT_IFS"
+  fi
+
+  ##########################
+  # Lint the OpenAPI files #
+  ##########################
+  # LintCodebase "FILE_TYPE" "LINTER_NAME" "LINTER_CMD" "FILE_TYPES_REGEX" "FILE_ARRAY"
+  LintCodebase "OPENAPI" "spectral" "spectral lint -r $OPENAPI_LINTER_RULES" "disabledfileext" "${FILE_ARRAY_OPENAPI[@]}"
+fi
+
 ##########
 # Footer #
 ##########