From 5142e0aebdc282e6ac73a07d4793e0fa4bd9ff01 Mon Sep 17 00:00:00 2001
From: Eric Nemchik <eric@nemchik.com>
Date: Wed, 1 Jul 2020 14:00:05 -0500
Subject: [PATCH] Add colors to output

---
 .automation/cleanup-docker.sh                 | 32 +++++-----
 .../templates/ghe-config-apply.sh             | 12 ++--
 .automation/upload-docker.sh                  | 58 +++++++++----------
 lib/buildFileList.sh                          |  8 +--
 lib/linter.sh                                 | 36 ++++++------
 lib/termColors.sh                             | 27 +++++++++
 lib/worker.sh                                 | 36 ++++++------
 7 files changed, 119 insertions(+), 90 deletions(-)
 create mode 100644 lib/termColors.sh

diff --git a/.automation/cleanup-docker.sh b/.automation/cleanup-docker.sh
index 838119c4..f493bd6c 100755
--- a/.automation/cleanup-docker.sh
+++ b/.automation/cleanup-docker.sh
@@ -54,8 +54,8 @@ ValidateInput()
   # Validate GITHUB_WORKSPACE #
   ############################
   if [ -z "$GITHUB_WORKSPACE" ]; then
-    echo "ERROR! Failed to get [GITHUB_WORKSPACE]!"
-    echo "ERROR:[$GITHUB_WORKSPACE]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_WORKSPACE]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_WORKSPACE]"
     exit 1
   else
     echo "Successfully found:[GITHUB_WORKSPACE], value:[$GITHUB_WORKSPACE]"
@@ -66,8 +66,8 @@ ValidateInput()
   #######################
   if [ -z "$IMAGE_REPO" ]; then
     # No repo was pulled
-    echo "ERROR! Failed to get [IMAGE_REPO]!"
-    echo "ERROR:[$IMAGE_REPO]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [IMAGE_REPO]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$IMAGE_REPO]"
     exit 1
   elif [[ "$IMAGE_REPO" == "github/super-linter" ]]; then
     # Found our main repo
@@ -82,8 +82,8 @@ ValidateInput()
   # Validate IMAGE_VERSION #
   ##########################
   if [ -z "$IMAGE_VERSION" ]; then
-    echo "ERROR! Failed to get [IMAGE_VERSION]!"
-    echo "ERROR:[$IMAGE_VERSION]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [IMAGE_VERSION]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$IMAGE_VERSION]"
     exit 1
   else
     echo "Successfully found:[IMAGE_VERSION], value:[$IMAGE_VERSION]"
@@ -93,8 +93,8 @@ ValidateInput()
   # Validate DOCKER_USERNAME #
   ############################
   if [ -z "$DOCKER_USERNAME" ]; then
-    echo "ERROR! Failed to get [DOCKER_USERNAME]!"
-    echo "ERROR:[$DOCKER_USERNAME]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [DOCKER_USERNAME]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$DOCKER_USERNAME]"
     exit 1
   else
     echo "Successfully found:[DOCKER_USERNAME], value:[$DOCKER_USERNAME]"
@@ -104,8 +104,8 @@ ValidateInput()
   # Validate DOCKER_PASSWORD #
   ############################
   if [ -z "$DOCKER_PASSWORD" ]; then
-    echo "ERROR! Failed to get [DOCKER_PASSWORD]!"
-    echo "ERROR:[$DOCKER_PASSWORD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [DOCKER_PASSWORD]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$DOCKER_PASSWORD]"
     exit 1
   else
     echo "Successfully found:[DOCKER_PASSWORD], value:[********]"
@@ -157,8 +157,8 @@ LoginToDocker()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to authenticate to DockerHub!"
-    echo "ERROR:[$LOGIN_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to authenticate to DockerHub!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LOGIN_CMD]"
     exit 1
   else
     # SUCCESS
@@ -197,8 +197,8 @@ RemoveImage()
     ##############################
     if [ $ERROR_CODE -ne 0 ]; then
       # ERROR
-      echo "ERROR! Failed to gain token from DockerHub!"
-      echo "ERROR:[$TOKEN]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to gain token from DockerHub!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$TOKEN]"
       exit 1
     else
       # SUCCESS
@@ -222,8 +222,8 @@ RemoveImage()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to remove tag from DockerHub!"
-    echo "ERROR:[$REMOVE_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to remove tag from DockerHub!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$REMOVE_CMD]"
     exit 1
   else
     # SUCCESS
diff --git a/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh b/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
index f33f0475..4a25c0ca 100644
--- a/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
+++ b/.automation/test/ansible/ghe-initialize/templates/ghe-config-apply.sh
@@ -53,8 +53,8 @@ CheckGHEPid()
       # Check the shell for errors #
       ##############################
       if [ $ERROR_CODE -ne 0 ]; then
-        echo "ERROR! Failed to sleep!"
-        echo "ERROR:[$SLEEP_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to sleep!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$SLEEP_CMD]"
         echo "Will try to call apply as last effort..."
         ####################################
         # Call config apply as last effort #
@@ -117,8 +117,8 @@ CheckGHEProcess()
       # Check the shell for errors #
       ##############################
       if [ $ERROR_CODE -ne 0 ]; then
-        echo "ERROR! Failed to sleep!"
-        echo "ERROR:[$SLEEP_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to sleep!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$SLEEP_CMD]"
         echo "Will try to call apply as last effort..."
         ####################################
         # Call config apply as last effort #
@@ -161,8 +161,8 @@ RunConfigApply()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # Errors
-    echo "ERROR! Failed to run config apply command!"
-    echo "ERROR:[$APPLY_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to run config apply command!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$APPLY_CMD]"
     exit 1
   else
     # Success
diff --git a/.automation/upload-docker.sh b/.automation/upload-docker.sh
index 55719d6b..03f02a91 100755
--- a/.automation/upload-docker.sh
+++ b/.automation/upload-docker.sh
@@ -60,8 +60,8 @@ ValidateInput()
   # Validate GITHUB_WORKSPACE #
   #############################
   if [ -z "$GITHUB_WORKSPACE" ]; then
-    echo "ERROR! Failed to get [GITHUB_WORKSPACE]!"
-    echo "ERROR:[$GITHUB_WORKSPACE]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_WORKSPACE]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_WORKSPACE]"
     exit 1
   else
     echo "Successfully found:[GITHUB_WORKSPACE], value:[$GITHUB_WORKSPACE]"
@@ -71,8 +71,8 @@ ValidateInput()
   # Validate REGISTRY #
   #####################
   if [ -z "$REGISTRY" ]; then
-    echo "ERROR! Failed to get [REGISTRY]!"
-    echo "ERROR:[$REGISTRY]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [REGISTRY]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$REGISTRY]"
     exit 1
   else
     echo "Successfully found:[REGISTRY], value:[$REGISTRY]"
@@ -86,8 +86,8 @@ ValidateInput()
     # Validate GPR_USERNAME #
     #########################
     if [ -z "$GPR_USERNAME" ]; then
-      echo "ERROR! Failed to get [GPR_USERNAME]!"
-      echo "ERROR:[$GPR_USERNAME]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GPR_USERNAME]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GPR_USERNAME]"
       exit 1
     else
       echo "Successfully found:[GPR_USERNAME], value:[$GPR_USERNAME]"
@@ -97,8 +97,8 @@ ValidateInput()
     # Validate GPR_TOKEN #
     ######################
     if [ -z "$GPR_TOKEN" ]; then
-      echo "ERROR! Failed to get [GPR_TOKEN]!"
-      echo "ERROR:[$GPR_TOKEN]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GPR_TOKEN]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GPR_TOKEN]"
       exit 1
     else
       echo "Successfully found:[GPR_TOKEN], value:[********]"
@@ -111,8 +111,8 @@ ValidateInput()
     # Validate DOCKER_USERNAME #
     ############################
     if [ -z "$DOCKER_USERNAME" ]; then
-      echo "ERROR! Failed to get [DOCKER_USERNAME]!"
-      echo "ERROR:[$DOCKER_USERNAME]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [DOCKER_USERNAME]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$DOCKER_USERNAME]"
       exit 1
     else
       echo "Successfully found:[DOCKER_USERNAME], value:[$DOCKER_USERNAME]"
@@ -122,8 +122,8 @@ ValidateInput()
     # Validate DOCKER_PASSWORD #
     ############################
     if [ -z "$DOCKER_PASSWORD" ]; then
-      echo "ERROR! Failed to get [DOCKER_PASSWORD]!"
-      echo "ERROR:[$DOCKER_PASSWORD]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [DOCKER_PASSWORD]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$DOCKER_PASSWORD]"
       exit 1
     else
       echo "Successfully found:[DOCKER_PASSWORD], value:[********]"
@@ -132,7 +132,7 @@ ValidateInput()
   # We were not passed a registry to update #
   ###########################################
   else
-    echo "ERROR! Failed to find a valid registry!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find a valid registry!"
     echo "Registry:[$REGISTRY]"
     exit 1
   fi
@@ -142,8 +142,8 @@ ValidateInput()
   # Validate IMAGE_REPO #
   #######################
   if [ -z "$IMAGE_REPO" ]; then
-    echo "ERROR! Failed to get [IMAGE_REPO]!"
-    echo "ERROR:[$IMAGE_REPO]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [IMAGE_REPO]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$IMAGE_REPO]"
     exit 1
   else
     echo "Successfully found:[IMAGE_REPO], value:[$IMAGE_REPO]"
@@ -177,8 +177,8 @@ ValidateInput()
     # Check the shell for errors #
     ##############################
     if [ $ERROR_CODE -ne 0 ]; then
-      echo "ERROR! Failed to get branch name!"
-      echo "ERROR:[$BRANCH_NAME]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get branch name!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$BRANCH_NAME]"
       exit 1
     fi
 
@@ -224,8 +224,8 @@ ValidateInput()
   # Validate DOCKERFILE_PATH #
   ############################
   if [ -z "$DOCKERFILE_PATH" ]; then
-    echo "ERROR! Failed to get [DOCKERFILE_PATH]!"
-    echo "ERROR:[$DOCKERFILE_PATH]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [DOCKERFILE_PATH]!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$DOCKERFILE_PATH]"
     exit 1
   else
     echo "Successfully found:[DOCKERFILE_PATH], value:[$DOCKERFILE_PATH]"
@@ -267,8 +267,8 @@ Authenticate()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to authenticate to $NAME!"
-    echo "ERROR:[$LOGIN_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to authenticate to $NAME!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LOGIN_CMD]"
     exit 1
   else
     # SUCCESS
@@ -293,7 +293,7 @@ BuildImage()
   ################################
   if [ ! -f "$DOCKERFILE_PATH" ]; then
     # No file found
-    echo "ERROR! failed to find Dockerfile at:[$DOCKERFILE_PATH]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} failed to find Dockerfile at:[$DOCKERFILE_PATH]"
     echo "Please make sure you give full path!"
     echo "Example:[/configs/Dockerfile] or [Dockerfile] if at root directory"
     exit 1
@@ -314,7 +314,7 @@ BuildImage()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! failed to [build] Dockerfile!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} failed to [build] Dockerfile!"
     exit 1
   else
     # SUCCESS
@@ -338,7 +338,7 @@ BuildImage()
     ##############################
     if [ $ERROR_CODE -ne 0 ]; then
       # ERROR
-      echo "ERROR! failed to [tag] Dockerfile!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} failed to [tag] Dockerfile!"
       exit 1
     else
       # SUCCESS
@@ -374,7 +374,7 @@ UploadImage()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! failed to [upload] Dockerfile!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} failed to [upload] Dockerfile!"
     exit 1
   else
     # SUCCESS
@@ -397,8 +397,8 @@ UploadImage()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to get information about built Image!"
-    echo "ERROR:[$GET_INFO_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get information about built Image!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GET_INFO_CMD]"
     exit 1
   else
     ################
@@ -440,7 +440,7 @@ UploadImage()
     ##############################
     if [ $ERROR_CODE -ne 0 ]; then
       # ERROR
-      echo "ERROR! failed to [upload] MAJOR_TAG:[$MAJOR_TAG] Dockerfile!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} failed to [upload] MAJOR_TAG:[$MAJOR_TAG] Dockerfile!"
       exit 1
     else
       # SUCCESS
@@ -495,7 +495,7 @@ else
   #########
   # ERROR #
   #########
-  echo "ERROR! Registry not set correctly!"
+  echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Registry not set correctly!"
   echo "Registry:[$REGISTRY]"
   exit 1
 fi
diff --git a/lib/buildFileList.sh b/lib/buildFileList.sh
index c10284c8..d0948419 100755
--- a/lib/buildFileList.sh
+++ b/lib/buildFileList.sh
@@ -39,7 +39,7 @@ function BuildFileList()
   if [ $ERROR_CODE -ne 0 ]; then
     # Error
     echo "Failed to switch to $DEFAULT_BRANCH branch to get files changed!"
-    echo "ERROR:[$SWITCH_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$SWITCH_CMD]"
     exit 1
   fi
 
@@ -67,8 +67,8 @@ function BuildFileList()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # Error
-    echo "ERROR! Failed to gain a list of all files changed!"
-    echo "ERROR:[${RAW_FILE_ARRAY[*]}]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to gain a list of all files changed!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[${RAW_FILE_ARRAY[*]}]"
     exit 1
   fi
 
@@ -429,7 +429,7 @@ function BuildFileList()
   if [ $ERROR_CODE -ne 0 ]; then
     # Error
     echo "Failed to switch back to branch!"
-    echo "ERROR:[$SWITCH2_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$SWITCH2_CMD]"
     exit 1
   fi
 
diff --git a/lib/linter.sh b/lib/linter.sh
index 0801a9ee..01e937d3 100755
--- a/lib/linter.sh
+++ b/lib/linter.sh
@@ -10,6 +10,8 @@
 # Source Function Files #
 #########################
 # shellcheck source=/dev/null
+source /action/lib/termColors.sh      # Source the function script(s)
+# shellcheck source=/dev/null
 source /action/lib/buildFileList.sh   # Source the function script(s)
 # shellcheck source=/dev/null
 source /action/lib/validation.sh      # Source the function script(s)
@@ -322,8 +324,8 @@ GetLinterRules()
     # Check the shell for errors #
     ##############################
     if [ $ERROR_CODE -ne 0 ]; then
-      echo "ERROR! Failed to set file:[$FILE_NAME] as default!"
-      echo "ERROR:[$CP_CMD]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to set file:[$FILE_NAME] as default!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$CP_CMD]"
       exit 1
     fi
   else
@@ -373,8 +375,8 @@ GetStandardRules()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # ERROR
-    echo "ERROR! Failed to gain list of ENV vars to load!"
-    echo "ERROR:[${GET_ENV_ARRAY[*]}]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to gain list of ENV vars to load!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[${GET_ENV_ARRAY[*]}]"
     exit 1
   fi
 
@@ -575,8 +577,8 @@ GetGitHubVars()
     # Validate we have a value #
     ############################
     if [ -z "$GITHUB_SHA" ]; then
-      echo "ERROR! Failed to get [GITHUB_SHA]!"
-      echo "ERROR:[$GITHUB_SHA]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_SHA]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_SHA]"
       exit 1
     else
       echo "Successfully found:[GITHUB_SHA], value:[$GITHUB_SHA]"
@@ -586,8 +588,8 @@ GetGitHubVars()
     # Validate we have a value #
     ############################
     if [ -z "$GITHUB_WORKSPACE" ]; then
-      echo "ERROR! Failed to get [GITHUB_WORKSPACE]!"
-      echo "ERROR:[$GITHUB_WORKSPACE]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_WORKSPACE]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_WORKSPACE]"
       exit 1
     else
       echo "Successfully found:[GITHUB_WORKSPACE], value:[$GITHUB_WORKSPACE]"
@@ -597,8 +599,8 @@ GetGitHubVars()
     # Validate we have a value #
     ############################
     if [ -z "$GITHUB_EVENT_PATH" ]; then
-      echo "ERROR! Failed to get [GITHUB_EVENT_PATH]!"
-      echo "ERROR:[$GITHUB_EVENT_PATH]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_EVENT_PATH]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_EVENT_PATH]"
       exit 1
     else
       echo "Successfully found:[GITHUB_EVENT_PATH], value:[$GITHUB_EVENT_PATH]"
@@ -617,8 +619,8 @@ GetGitHubVars()
     # Validate we have a value #
     ############################
     if [ -z "$GITHUB_ORG" ]; then
-      echo "ERROR! Failed to get [GITHUB_ORG]!"
-      echo "ERROR:[$GITHUB_ORG]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_ORG]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_ORG]"
       exit 1
     else
       echo "Successfully found:[GITHUB_ORG], value:[$GITHUB_ORG]"
@@ -633,8 +635,8 @@ GetGitHubVars()
     # Validate we have a value #
     ############################
     if [ -z "$GITHUB_REPO" ]; then
-      echo "ERROR! Failed to get [GITHUB_REPO]!"
-      echo "ERROR:[$GITHUB_REPO]"
+      echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to get [GITHUB_REPO]!"
+      echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$GITHUB_REPO]"
       exit 1
     else
       echo "Successfully found:[GITHUB_REPO], value:[$GITHUB_REPO]"
@@ -668,7 +670,7 @@ Footer()
     ##################
     if [ "${!ERROR_COUNTER}" -ne 0 ]; then
       # Print the goods
-      echo "ERRORS FOUND in $LANGUAGE:[${!ERROR_COUNTER}]"
+      echo -e "${NC}${B[R]}${F[W]}ERRORS FOUND${NC} in $LANGUAGE:[${!ERROR_COUNTER}]"
     fi
   done
 
@@ -676,7 +678,7 @@ Footer()
   # Exit with 0 if errors disabled #
   ##################################
   if [ "$DISABLE_ERRORS" == "true" ]; then
-    echo "WARN! Exiting with exit code:[0] as:[DISABLE_ERRORS] was set to:[$DISABLE_ERRORS]"
+    echo -e "${NC}${F[Y]}WARN!${NC} Exiting with exit code:[0] as:[DISABLE_ERRORS] was set to:[$DISABLE_ERRORS]"
     exit 0
   ###############################
   # Exit with 1 if errors found #
@@ -715,7 +717,7 @@ Footer()
     # Footer prints #
     #################
     echo ""
-    echo "All file(s) linted successfully with no errors detected"
+    echo -e "${NC}${F[G]}All file(s) linted successfully with no errors detected${NC}"
     echo "----------------------------------------------"
     echo ""
     # Successful exit
diff --git a/lib/termColors.sh b/lib/termColors.sh
new file mode 100644
index 00000000..ce3e0e66
--- /dev/null
+++ b/lib/termColors.sh
@@ -0,0 +1,27 @@
+#!/usr/bin/env bash
+
+declare -Agr B=(
+    [B]=$(echo -e "\e[44m")
+    [C]=$(echo -e "\e[46m")
+    [G]=$(echo -e "\e[42m")
+    [K]=$(echo -e "\e[40m")
+    [M]=$(echo -e "\e[45m")
+    [R]=$(echo -e "\e[41m")
+    [W]=$(echo -e "\e[47m")
+    [Y]=$(echo -e "\e[43m")
+)
+declare -Agr F=(
+    [B]=$(echo -e "\e[0;34m")
+    [C]=$(echo -e "\e[0;36m")
+    [G]=$(echo -e "\e[0;32m")
+    [K]=$(echo -e "\e[0;30m")
+    [M]=$(echo -e "\e[0;35m")
+    [R]=$(echo -e "\e[0;31m")
+    [W]=$(echo -e "\e[0;37m")
+    [Y]=$(echo -e "\e[0;33m")
+)
+readonly NC=$(echo -e "\e[0m")
+
+export B
+export F
+export NC
diff --git a/lib/worker.sh b/lib/worker.sh
index fc1d65f1..b58324a6 100755
--- a/lib/worker.sh
+++ b/lib/worker.sh
@@ -50,8 +50,8 @@ function LintCodebase()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # Failed
-    echo "ERROR! Failed to find [$LINTER_NAME] in system!"
-    echo "ERROR:[$VALIDATE_INSTALL_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find [$LINTER_NAME] in system!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]"
     exit 1
   else
     # Success
@@ -187,8 +187,8 @@ function LintCodebase()
         #########
         # Error #
         #########
-        echo "ERROR! Found errors in [$LINTER_NAME] linter!"
-        echo "ERROR:[$LINT_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]"
         # Increment the error count
         (("ERRORS_FOUND_$FILE_TYPE++"))
       else
@@ -240,8 +240,8 @@ function TestCodebase()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # Failed
-    echo "ERROR! Failed to find [$LINTER_NAME] in system!"
-    echo "ERROR:[$VALIDATE_INSTALL_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find [$LINTER_NAME] in system!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]"
     exit 1
   else
     # Success
@@ -358,9 +358,9 @@ function TestCodebase()
         #########
         # Error #
         #########
-        echo "ERROR! Found errors in [$LINTER_NAME] linter!"
-        echo "ERROR:[$LINT_CMD]"
-        echo "ERROR: Linter CMD:[$LINTER_COMMAND $FILE]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC} Linter CMD:[$LINTER_COMMAND $FILE]"
         # Increment the error count
         (("ERRORS_FOUND_$FILE_TYPE++"))
         # Increment counter that check was ran
@@ -384,10 +384,10 @@ function TestCodebase()
         #########
         # Error #
         #########
-        echo "ERROR! Found errors in [$LINTER_NAME] linter!"
-        echo "ERROR! This file should have failed test case!"
-        echo "ERROR:[$LINT_CMD]"
-        echo "ERROR: Linter CMD:[$LINTER_COMMAND $FILE]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} This file should have failed test case!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC} Linter CMD:[$LINTER_COMMAND $FILE]"
         # Increment the error count
         (("ERRORS_FOUND_$FILE_TYPE++"))
         # Increment counter that check was ran
@@ -410,7 +410,7 @@ function TestCodebase()
     #################################################
     # We failed to find files and no tests were ran #
     #################################################
-    echo "ERROR! Failed to find any tests ran for the Linter:[$LINTER_NAME]"!
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find any tests ran for the Linter:[$LINTER_NAME]"!
     echo "Please validate logic or that tests exist!"
     exit 1
   fi
@@ -513,8 +513,8 @@ function LintAnsibleFiles()
   ##############################
   if [ $ERROR_CODE -ne 0 ]; then
     # Failed
-    echo "ERROR! Failed to find $LINTER_NAME in system!"
-    echo "ERROR:[$VALIDATE_INSTALL_CMD]"
+    echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Failed to find $LINTER_NAME in system!"
+    echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$VALIDATE_INSTALL_CMD]"
     exit 1
   else
     # Success
@@ -619,8 +619,8 @@ function LintAnsibleFiles()
         #########
         # Error #
         #########
-        echo "ERROR! Found errors in [$LINTER_NAME] linter!"
-        echo "ERROR:[$LINT_CMD]"
+        echo -e "${NC}${B[R]}${F[W]}ERROR!${NC} Found errors in [$LINTER_NAME] linter!"
+        echo -e "${NC}${B[R]}${F[W]}ERROR:${NC}[$LINT_CMD]"
         # Increment error count
         ((ERRORS_FOUND_ANSIBLE++))
       else